Aquatronica

Status
Not open for further replies.
Sorry Bebo, I'm not really following what it is you are trying to do exactly?

Do you mean lost the connection between the PC and your AQT?
 
i had the aqua connected to my old computer worked great... then it lost connection and i cant get it to connnect again.. it also did not read my other powerunits.. i have 4 units when i had it running i tried to connect another unit but nothing happened.. it shoud read the new unit right? plug and play?

edit its connecting again but everytime i plug in a new powerstrip via usb it shuts down? what am i doing wrong.
 
Last edited:
You have to make sure the AQT is on the main 'status' screen when trying to connect. Check this out.

Also, if you are connecting your power units to the AQT while the AQT is hooked to the computer I do not think it will register them. Connect your power units, and then connect to the AQT with your computer.
 
If it shows a lock above all the plugs on the screen, the powerbar is in manual mode (all plugs are on). There's a small rocker switch on the powerbar, turn it off manual to automatic, then the plugs can all respond to the programming.
 
Ron thank yyou for helping me out on the phone... I know aquariumsobsessed was banned but i gotta tell you they really have gone out of their way for me. Ron has spent hours on the phone with me trying to get the system up and running..

Thanks for helping me out ron... even when it 1am you time... i appreciate it

Gabriel
 
well i got it working again. when i plugged the main unit back in, it took forever and a half to come back up. when it did, the time was all out of wack. the power hadn't gone out, so i don't know what was going on. once i set the clock, it started to work correctly again. has anybody else had this happen to them?

Thanks,

doug
 
<a href=showthread.php?s=&postid=6676336#post6676336 target=_blank>Originally posted</a> by Tagareef
Gabriel...is it working now?

i got it to run on an old computer, 1st powerbar is running no problem. it still wont connect to my laptop via usb cable, have someone in canada lookin ginto that one..
Every time i plug in a new powerbar the aqua shuts off.. waiting to hear from aqua on what the problem is and how to fix it.

hope to have it up this week.
 
Re: question

Re: question

<a href=showthread.php?s=&postid=6682598#post6682598 target=_blank>Originally posted</a> by scbasser5
I have not followed this whole thread, but why was aquarium obsessed banned?

Please read the whole thread to answer questions like this and/or utilize the search.
PLEASE do not expect others to answer to these questions on this thread as it will lead to a locked thread... we've been through this already. Thanks !
 
No problem Bebo77. We are hard at work trying to get this resolved.

The thanks should go to you and the others that have displayed great patience. We are grateful for customers such as yourself, you make all this work worth while. Also, thanks to all Aquatronica users that have and are spending time helping others to set up controllers.
 
I should have some time to work on it this weekend, but until then I can't do anything.

nicholas: What firmware version is on your pH interface?
 
Status
Not open for further replies.
Back
Top