BK DC200 setup

[sebimme]

My sump level at moment is 21 cm do you think I have to low to 20 cm?


Inviato dal mio iPhone utilizzando Tapatalk

 

[slief]

Also keep in mind that you changed pump which changes the characteristics of the skimmer. With the RD3, the air intake is tied directly to the motor RPM which changes as you adjust the wattage. With the RD1 pump, the RPM is fixed and the air intake is controlled by the nozzle adjustments so the skimmer is going to respond different than with the RD3 which is controlled by the pump speed/wattage to adjust foam density coupled with the wedge pipe to adjust from wet to dry. The key to fine tuning with the RD1 is finding the sweet spot with the nozzle adjustment to get the most dense foam coupled with monitoring the skimmate to find a point in the nozzle adjustment and wedge pipe setting that makes you happy in terms of color, smell of the skimmate production.

 

[slief]

My sump level at moment is 21 cm do you think I have to low to 20 cm?


Inviato dal mio iPhone utilizzando Tapatalk

I think you are over thinking things and your sump level is fine. See my responses above.