Broken Hydrofoamer shaft

[Jeff]

Roger, where can I get the shaft for a Hydrofoamer in Chicago? I just realized that one of the pumps on my 9440 was not working. I took it apart and found the white shaft is broken and the pump is hot. I think everything is ok except for the shaft. Is it attached to the pinwheel permanently?
Anyway, any guidance from you is helpful here, I need to get this fixed quick so finding a replacement is urgent.
Thanks for any advice .

Jeff

 

[Jeff]

Oh, it's a 9420.04a.

 

[rvitko]

I can't think of anyone that would have it, the shaft is permanently fixed to the drive unit so you would need a 9420.047 drive unit. I will send you one, PM me your info. For the meantime I would convert it to a 9420 with the taller pipe and screw cap over the other pump inlet.

 

[Jeff]

I can't think of anyone that would have it, the shaft is permanently fixed to the drive unit so you would need a 9420.047 drive unit. I will send you one, PM me your info. For the meantime I would convert it to a 9420 with the taller pipe and screw cap over the other pump inlet.

Thanks Roger, it was a shot in the dark. I appreciate the help and will pm you my contact info.

Jeff

 

[Jeff]

Now I just need to find that cap lol...

 

[rvitko]

If you can't find it a 3/4" FPT cap is all you need, you should be able to get one at any hardware store. Ideally you would put a garden hose gasket in it to seal it up well.

 

[Jeff]

Got the parts today Roger. Thanks so much for everything. Happy Holidays .

 

[rvitko]

Thank you!