Calcium Reactor Regulator Guage!!?

[Islander84]

I set my psi about 15 and this morning the thing is at 10..? I noticed a small drop before i went to bed and reset it to 15 as well... The high side is fine its on about 800. The bubble count is still going steady..And my effluent is at about 40dkh...Any ideas what might be causing this.? Thanks

 

[tkeracer619]

its normal if you have just installed a new tank. As the regulator works the spring inside gets hot and isn't as strong. I usually takes a few hours and then an adjustment is required.

 

[justin_g]

That's good to know, I had no idea about that either.