tpdpercula
New member
Well I have been in the process of starting a dedicated clownfish broodstock system. All tanks were purchased and drilled for bulkheads. The tanks were then divided in half by 1/8" black acrylic with top sections routed and sides drilled to allow water flow. This has been a couple week process because of the lack of free time to work on it. Thanks Travis for your insight and suggestions. Here is the overview of the system.
-(9) 20 gallon Long All Glass aquariums, w/ 1" drain and 1/2" returns.
-Mag 24 return pump
-Black 1/8" acrylic dividers in 6 of the 9 tanks.
-2" drainage plumbing to sump
-1" to 1/2" return
Pictures should be up either tonight or at least by the start of the weekend. Please be patient and of course all questions are welcome and I will do my best to anwser in somewhat of a timely manner. ENJOY!
-(9) 20 gallon Long All Glass aquariums, w/ 1" drain and 1/2" returns.
-Mag 24 return pump
-Black 1/8" acrylic dividers in 6 of the 9 tanks.
-2" drainage plumbing to sump
-1" to 1/2" return
Pictures should be up either tonight or at least by the start of the weekend. Please be patient and of course all questions are welcome and I will do my best to anwser in somewhat of a timely manner. ENJOY!