Works on the same prencipal as my calk doser. sealed container above my sump. Sump level drops and air enters the container. Calk flows out till sump level reaches the hole in the bottom of the container. Like a glass turned upside down under water then lifted 1/2 the way out of the water. The water stays in the glass.
I can easily see this working in a static model but in the real world I am having a problem figuring out how they keep the vacuum maintained. Any additions to the tank like air bubbles or water should end up displacing an exact volume of water out of the feeding holes. I wonder how the pumps work, they must have to be ever so careful that no micro bubbles are entering the tank.
BTW while I agree it's cool looking, but it's an absolutely crazy idea. It's right up there with hanging a vho Ballast with tie straps right above your tank. It may work but sooner or later...
PrivateJoker64 hit the nail on the head. It's sealed at the top so that no air gets in therefore creating a vacuum. As far as a pump goes, as long as it is a closed loop, it's fine.
I'll bet there's a way that they seal the feeding holes so that they can upen up a service door or port (like on a submarine) to service the inside of the tank.
It is a really neat idea, but I wouldn't trust my fish in that. Any little pin-hole, and it's goodbye fishies. Besides, how could you possibly deal with gas exchanges. You need oxygen to get in and nitrogen to bubble out.
You know, that reminds me of those water filled barometers. The water moves up and down in a tube depending on the air pressure around it. A sudden drop in air pressure would probably make a messy floor.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.