hi, setting up new tank, 52 x 28 x 24, and was wondering dimensions of the 7095 controller, to set up pwr panel. i'm setting aside room for when i get controllers. Also, can you recommend pumps/placement for the streams. I probally will only do 2, but may add the deco rock if needed. If i use rock, how long is power cable, or will i have to get an underwater connector to add extension cable? and with rock, do i need to protect the intake more, or do critters etc. kinda stay out? sry for all the questions, thx, lawrence
couple questions on streams
- Thread starter orb
- Start date
It is about 4" by 7.75" you need another 2" on the bottom for the pump connections. The cables from driver to pump are 16ft, splicing would be very difficult if not impossible seeing as their are 5 very fine wires in the cable. I would get 2 6000 and place them in the top back corners aimed to the front center. The only animals at risk from the intake are anemones. Sometimes crabs and snails crawl into the outlet when the pump is off.
