Dialing in the 7095 Controller

[skairik]

I have a 225g reef (60"L X 24"W X 30"T). Recently purchased the TS24 kit and was wondering if anybody could offer any advice on how best to dial in the controller (flow intervals, etc). Thanks

 

[Jar*Head]

Ok, what do you need help on. What setting are you planning to run your two pumps? How do you position your pumps? I need all that info to be able to help you out.

Thanks

Steve

 

[thanhtan090982]

steve is a master, he stopped by my house and within 5 minutes my tunze set up is set and kicking.

 

[skairik]

Reefer714, I know nothing about settings, etc. The advise I'm looking for is exactly that; what settings, optimal placement of pumps, etc. Thanks

 

[Jar*Head]

I would put one pump on each side of the tank facing toward the other end making sure they are not directly facing each other, use tunze magnet and put your pump as high up as you can, make sure the solid part of the pump facing up or else it will suck air. Plug one pump on chanel 1.A or 1.1 and the other on 2.A or 2.1. Set your multi controller on interval 2 (help prolong the life of your pump). set your nob (3) at 1.5 sec and the interval (nob 5) at the mid (approx 30 sec interval). Set 1.A or 1.1 nob at 30% and 1B or 1.2 at 100%. do the same with your 2.1 and 2.2. Result your pump will operate between 30-100%. If you need further help just call me at 714 254 5671. it is much easy to show you over the phone

 

[Jar*Head]

<a href=showthread.php?s=&postid=7789327#post7789327 target=_blank>Originally posted</a> by thanhtan090982
steve is a master, he stopped by my house and within 5 minutes my tunze set up is set and kicking.

I am not the master . I learned most of it from either Roger or playing around with my tunze. Your user manual are very easy to understand