Dimmable ballast with EVG-ap2

[Tony Romano]

I am attempting to set up T5 dimming

I have test setup using 1 lamp - LEDs are working off of L3 - T5 will not. Is this because of one lamp? Assuming everything else is correct.

 

[AQD_ottawa]

Hard to tell without seeing your wiring.

If you have dual strike ballasts then yes they need to be wired.

Also make sure you have L3 set to the correct illumination channel and you have that set to dimmable

 

[Tony Romano]

I don't seem to have any DC output from EVG-ap2, when illination is programmed for 100% should dc be on all the time?

 

[AQD_ottawa]

no, you then have not got the L3 configured correctly or your wiring is incorrect

 

[Tony Romano]

I am using QT2x54/120PHO-DIM - wired per drawing on ballast and EV instructions.

 

[AQD_ottawa]

sorry a product code means nothing to me there are stacks of ballasts out there

 

[Tony Romano]

So the dc is a momentary thing switch?

The ballast is Sylvania purchased from Cherry, I assumed it was GHL distributied.

 

[AQD_ottawa]

yes it is but I cant remeber all the codes from home sorry

Not quite sure what you mean by your first sentance

best thing is to email for support much easier than me logging on to reply. sales@aqua-digital.com