bigdaddystar
New member
No adapter this is going to require retrofitting on your part...The transformer is available at radioshack and the wiring will be done by you by means of cutting stripping and wire nutting the wires together.
The ballast will have a black and white wire on one side (most likely, yellow,blue or red on the side, stay away from those wires)
The cord will have a black and white wire and the transformer might just have to black wires or a black and white...all the black go together under a wirenut and all the whites go together.
Here is a crude drawing of how it should be done...
The ballast will have a black and white wire on one side (most likely, yellow,blue or red on the side, stay away from those wires)
The cord will have a black and white wire and the transformer might just have to black wires or a black and white...all the black go together under a wirenut and all the whites go together.
Here is a crude drawing of how it should be done...
Thank you, bigdaddystar. I'll try the second option as I'm trying to avoid as many extra connections as possible. Is there a keyword I should be googling to find an adapter that's located in the middle of the cord? All I seem to find are where the adapter is still the one that connects in the wall.