EuroReef Club

Status
Not open for further replies.
hello
somebody has had experiences with the Euro reef cs-80, is recommendable for a aquarium of 40gal, or are better the ASM G1X or the Remora Pro

thanks for your answers
 
I have a euro and a asm both work the same but I will agree the euro is built better.If money is an issue go with asm they work great if you want bragging rights go with a Euro
 
Heres er and asm side by side looking the same to me and with an air meter they pull the same amount of air.Only real performace difference is the er is 8 inches while the asm is 6 wide

ER is built better.

180-equip-2.jpg
 
I have an 8-2 that I just upgraded the Sedra 5000 pump to a GenX4100 (SP4). The pump did not come with the air line, so I used the one off the Sedra 5000. The problem is that it is trying to suck so much air that the tube makes a loud whine all the time. Also, skimmate production is worse than before replacing the pump. Does anyone know if the GenX4100s use a larger inside diameter air line tubing than the Sedra 5000s? If so, where could I get the replacement hose?
 
Joining In

Joining In

:beer:I just joined the Euro Reef club with my new RC500. Some sorry sucker is going to buy old ASM :dance:
 
I'm having an issue with my "older" ES 6-1 (almost 2 1/2 years old). Bought it new, it has always worked great but lately seems to be making less bubbles / foam, almost like it isn't getting enough air. Impeller was replaced about 6 months ago, entire skimmer is cleaned every month and pump soaked in vinegar. This morning I cleaned the cup again, and made sure there was nothing obstructing the air flow. (If I put my finger over the end of the air tube the suction doesn't seem as strong as I remember it being in the past)
There is an obvious line between the bubbles in the top 1/2 of the cup, and the mostly water with a few bubbles in the lower 1/2 of the cup. (Hard to see in the photo, indicated area with red lines)
SkimmerCup.jpg
[/IMG]

Do the pumps themselves just wear out within this time frame ? (It's a Sedra 3500) Any other suggestions ? Thanks.

(By the way - I add nothing to the tank except Randy's 2 part. No new additions, epoxy, etc. I can pretty much rule out anything in the water causing this)
 
im thinking about throwing my ASM away and getting a rs80 or a rc80 for my heavy load 40gal what are you thinking will it work is it ok with SPS as far as over skimming?
 
<a href=showthread.php?s=&postid=7335496#post7335496 target=_blank>Originally posted</a> by powdertang05
im thinking about throwing my ASM away and getting a rs80 or a rc80 for my heavy load 40gal what are you thinking will it work is it ok with SPS as far as over skimming?
Click to expand...

Thats what I just did, You wont regret it Got rid of my 4x for a RC500
 
If you are throwing the ASM's away let me know where.I will say it again I own both and do not see any differance in performance
 
I'll tell you what. If I turn my head one more time to look at that picture fishaholic, I'm gonna murder someone. It so true though
Anyways :beer: to the euroreef. bought a blem from h20tropicals. havent got it running yet but looks like an awsome unit
 
well its a AMS mini it has a very under powered pump genx1000 im thinking of upgrading it so i can get better performance what do you think or should i just forget it and get a euroreef
 
Status
Not open for further replies.

Similar threads

Radicaljbr
Monitoring and dosing
Replies
1
Views
198
Uncle99
Uncle99
machodik
My Tunze 6095
Replies
9
Views
418
machodik
machodik
U
Goniopora
Replies
3
Views
161
Uncle99
Uncle99
jay505
Is STARS still an active club
Replies
3
Views
862
griss
griss
Dr. Reef
Affordable Aquaria by Dr. Reefs Black Friday Sale
Replies
0
Views
155
Dr. Reef
Dr. Reef
Back
Top