Firmware & ProfiLuxControl

[Matthias Gross]

The version 3.05 has been tested now for more than 3 weeks and no problems or bugs occured.

From now on the version 3.05 has release state and is no more a beta-version. All new ProfiLux will be produced with 3.05.

If anyone wants to update; here are the links:
Firmware 3.05
http://www.ghl-kl.de/Produkte/Aquaristik/Download/AllProfiLuxII_V305.zip

ProfiLuxControl II V3.0.5.0
http://www.ghl-kl.de/Produkte/Aquaristik/Download/ProfiLuxControlII_V3050.exe

And thank you to all "beta-testers"!

 

[remember]

Matthias

I get a "error transmitting data" when I try to install the firmware. Can you describe the correct procedure (i.e., firmware or ProfiluxControl software installed first, etc.).

Regards,

 

[remember]

Firmware

Firmware

Matthias

Please also explain what changes have been made to ver. 3.0.5 over 3.0.3. I don't want to reset all of my settings unless I am missing important functionality.

Thanks,

 

[AQD_ottawa]

If you upload all your sensor data and settings data to your pc before F/ware upgrade you will not lose anything.

This feature is found under file at top left of control panel

 

[Matthias Gross]

new in 3.04:
- support of automatic IPs (with DHCP-server)
- supports Oxygen-card
- new operation modes level control

new in 3.05:
- programming of digital powerbars and dosing units with ProfiLuxControl 3.0.5.0 possible

Please refer to the newest manual (see link above)

Regarding firmware update
I guess you did not follow the instructions in all details:
FIRST confirm YES on the ProfiLux, AFTER THAT click OK

Hint:
Save all your settings and sensor data (see menu "File") before update.

 

[remember]

Thanks for this information. I'm up and running with the dimmable ballasts, and installed the update. By the way, for the next update, Calibration is mispelled Calipration.

 

[Matthias Gross]

I couldn't find "Calipration" in the source code.

Where is it exactly?

 

[remember]

Mattias - my apologies! Seems I sent you on a witch hunt. I just looked and realized that the mispelled word is actually 'Propability' and it is located in the Simulation module. I must have been under the influence

 

[remember]

Mathis

My unit has been working fine for 6 months, but yesterday my HID light stuck on. I've determined that one socket on the 4-plug analog power strip has stopped functioning. Have you heard of this happening?

Phil

 

[kidney514]

You're contact got stuck, because of the high amp the mh pulls, that is the main reason they have the high amp powerbar to prevent damage to the digital one!

http://www.aqua-digital.com/index.p...facturer_id=0&option=com_virtuemart&Itemid=30