zooman72
New member
These will probably sell on Nano-Reef, but figured I would throw them up here just in case someone was interested locally...
1) A pair of Bright Aquatics "True Spectrum" Par38's (18 watts, 90 degree optics, dimmable, about 12K), used for about 2 weeks over a glass top, so still in perfect condition. These are my design (not credited to me of course), now offered for sale generally - 4 RB: 2CB: 2NW: 2 V: 1R: 1Cy. The lights have no issues, I just have no use for them any longer as I am upgrading to a larger tank w/ a Maxspect Razor, and I had them made to try out the spectrum.
These would of course still be under warranty if BA had a proper business model (don't get me started...), but are good enough as a pair to light a 10g, 15g, or 20H (would need 3 for a 20L for most applications), or a smaller cube if using just one fixture. Asking $80 shipped each or $160 shipped for the pair (were $240 shipped new from Canada) - sorry, but shipping cost just went up for most shippers (up to 30% at USPS!)...$75 each picked up locally.
2) A pair of Steve'sLEDs 7-up boards with thermal adhesive, used for less than 2 months. The layout of the diodes is as follows, with the NW's at 4000K, and all diodes are Philips Luxeon ES:
a ) Board 1: RB:RB:RB: CB :RB:RB:RB
b ) Board 2: NW:RB:NW:NW:NW:RB:NW
These would make for an easy retrofit or new small build on a suspended heatsink with the addition of a couple more cool blues and 2-4 violets, and the boards have only 1 pair of solder points (all diodes on board dim together. Diodes quite close together, so no "disco effect". Asking $40 shipped for the pair with adhesive (would be more than $60 shipped new)...$35 picked up locally.
1) A pair of Bright Aquatics "True Spectrum" Par38's (18 watts, 90 degree optics, dimmable, about 12K), used for about 2 weeks over a glass top, so still in perfect condition. These are my design (not credited to me of course), now offered for sale generally - 4 RB: 2CB: 2NW: 2 V: 1R: 1Cy. The lights have no issues, I just have no use for them any longer as I am upgrading to a larger tank w/ a Maxspect Razor, and I had them made to try out the spectrum.
These would of course still be under warranty if BA had a proper business model (don't get me started...), but are good enough as a pair to light a 10g, 15g, or 20H (would need 3 for a 20L for most applications), or a smaller cube if using just one fixture. Asking $80 shipped each or $160 shipped for the pair (were $240 shipped new from Canada) - sorry, but shipping cost just went up for most shippers (up to 30% at USPS!)...$75 each picked up locally.
2) A pair of Steve'sLEDs 7-up boards with thermal adhesive, used for less than 2 months. The layout of the diodes is as follows, with the NW's at 4000K, and all diodes are Philips Luxeon ES:
a ) Board 1: RB:RB:RB: CB :RB:RB:RB
b ) Board 2: NW:RB:NW:NW:NW:RB:NW
These would make for an easy retrofit or new small build on a suspended heatsink with the addition of a couple more cool blues and 2-4 violets, and the boards have only 1 pair of solder points (all diodes on board dim together. Diodes quite close together, so no "disco effect". Asking $40 shipped for the pair with adhesive (would be more than $60 shipped new)...$35 picked up locally.
