Runner
Active member
Since I broke down my tank and sold off all the livestock, I've sat on the rest of the equipment too long without trying to seriously sell it. Since we have the Frag Swap coming up, I am reposting this and will market it to the surrounding area clubs.
I am selling the tank, stand, and canopy for $425 - basically the cost of the materials.
I made the stand and canopy with 2x4 framing, red oak front and trim, and 3/4" red oak plywood. The electrical receptacles are mounted on the full back plate and are included with the tank (along with an SO cord and plug external to the stand). You can see the details of my fabrication at this link (since they seemed to have removed my DIY articles from Reef Central):
http://www.diyreef.org/tiki-read_article.php?articleId=10
Here are some recent (taken this morning) photos of my tank:
Side
http://home.earthlink.net/~aquariapics/photos/Tank_75G_Side.jpg
Front, Open
http://home.earthlink.net/~aquariapics/photos/Tank_75G_2.jpg
Front, Closed
http://home.earthlink.net/~aquariapics/photos/Tank_75G_1.jpg
I also have the following for sale:
30G Glass Sump, $75 - with six baffles:
http://home.earthlink.net/~aquariapics/photos/Sump_30G_1.jpg
http://home.earthlink.net/~aquariapics/photos/Sump_30G_2.jpg
Berlin Turbo Skimmer, $75 - cracked, but repaired with WeldOn 4 & 15 and doesn't leak
http://home.earthlink.net/~aquariapics/photos/Skimmer_1.jpg
http://home.earthlink.net/~aquariapics/photos/Skimmer_2.jpg
Mag 12 Pump, $35 - Impeller rattles and should be replaced. Includes the return plumbing if you buy with the tank.
I will sell the above four items (tank setup, sump, skimmer, pump) for $550 if somebody will take it all off my hands.
I have already sold off the lights and the external overflow box. I have some other miscellaneous items like a Seio 820 and heaters and the like I haven't posted, but I am not worried about those.
I can meet you somewhere in Knoxville or bring these to the Frag Swap in June if you like.
Thanks!
-Scott
I am selling the tank, stand, and canopy for $425 - basically the cost of the materials.
I made the stand and canopy with 2x4 framing, red oak front and trim, and 3/4" red oak plywood. The electrical receptacles are mounted on the full back plate and are included with the tank (along with an SO cord and plug external to the stand). You can see the details of my fabrication at this link (since they seemed to have removed my DIY articles from Reef Central):
http://www.diyreef.org/tiki-read_article.php?articleId=10
Here are some recent (taken this morning) photos of my tank:
Side
http://home.earthlink.net/~aquariapics/photos/Tank_75G_Side.jpg
Front, Open
http://home.earthlink.net/~aquariapics/photos/Tank_75G_2.jpg
Front, Closed
http://home.earthlink.net/~aquariapics/photos/Tank_75G_1.jpg
I also have the following for sale:
30G Glass Sump, $75 - with six baffles:
http://home.earthlink.net/~aquariapics/photos/Sump_30G_1.jpg
http://home.earthlink.net/~aquariapics/photos/Sump_30G_2.jpg
Berlin Turbo Skimmer, $75 - cracked, but repaired with WeldOn 4 & 15 and doesn't leak
http://home.earthlink.net/~aquariapics/photos/Skimmer_1.jpg
http://home.earthlink.net/~aquariapics/photos/Skimmer_2.jpg
Mag 12 Pump, $35 - Impeller rattles and should be replaced. Includes the return plumbing if you buy with the tank.
I will sell the above four items (tank setup, sump, skimmer, pump) for $550 if somebody will take it all off my hands.
I have already sold off the lights and the external overflow box. I have some other miscellaneous items like a Seio 820 and heaters and the like I haven't posted, but I am not worried about those.
I can meet you somewhere in Knoxville or bring these to the Frag Swap in June if you like.
Thanks!
-Scott
Last edited: