SlowCobra
New member
For now I have a few pieces of equipment to post. I am shutting my tank down and in the next fews days I will be posting up pictures and prices of the livestock that is left in it. I will update this thread as I have pictures of things. All items must be picked up. I am located in Joliet. approximately 1.5 miles from I-55 at the Route 30 exit and 6 miles North of I-80 at the Larkin exit. Feel free to make REASONABLE offers.
Reef Octopus DNW 200 Recirculating Protein Skimmer I have mesh-modded the pump using fishing line and checked it's total power draw with a kill-a-watt. It was used for about a year and has sat for about 6 months. It needs a little better cleanup. I also cut the bottom plate to make it easier to get in and out of the sump. When I first got it some how I broke the drain nipple off the collection cup. I cleaned it thoroughly and glued it back on and have had zero issues since. Works perfectly $200 obo
Specifications:
- 7.8" Diameter
- 29.64" Tall
- Equiped with with needle wheel impeller recirculating pump
- - Requires additional feed pump with gph rating at approx. 1.5 times volume of your system.
- Recommended for aquariums up to 400 gallons
- Footprint 9" x 21"
Panworld external Pump I had this in use for about 18 months. It was cleaned every few months. In perfect working order. $175 obo
Model 200PS - equal to Iwaki MD70 Pressure rated
1750gph max flow
39 foot max head pressure
290 watts
1" MPT in/out
Precision Marine Kalk Reactor Used for 3 years or so. I gravity fed it with a 35 gal tank as the feed water. $150 obo
Overall Height
20"
Reaction Tube Diameter
6"
Reaction Tube Height
18"
Base Diameter
7.75"
Water inlet and outlet size
1/4" Polypropylene tubing
Method of feeding
Gravity or Pressure
Supplied Water Pump
Maxi-Jet 400
Reef Octopus DNW 200 Recirculating Protein Skimmer I have mesh-modded the pump using fishing line and checked it's total power draw with a kill-a-watt. It was used for about a year and has sat for about 6 months. It needs a little better cleanup. I also cut the bottom plate to make it easier to get in and out of the sump. When I first got it some how I broke the drain nipple off the collection cup. I cleaned it thoroughly and glued it back on and have had zero issues since. Works perfectly $200 obo
Specifications:
- 7.8" Diameter
- 29.64" Tall
- Equiped with with needle wheel impeller recirculating pump
- - Requires additional feed pump with gph rating at approx. 1.5 times volume of your system.
- Recommended for aquariums up to 400 gallons
- Footprint 9" x 21"
Panworld external Pump I had this in use for about 18 months. It was cleaned every few months. In perfect working order. $175 obo
Model 200PS - equal to Iwaki MD70 Pressure rated
1750gph max flow
39 foot max head pressure
290 watts
1" MPT in/out
Precision Marine Kalk Reactor Used for 3 years or so. I gravity fed it with a 35 gal tank as the feed water. $150 obo
Overall Height
20"
Reaction Tube Diameter
6"
Reaction Tube Height
18"
Base Diameter
7.75"
Water inlet and outlet size
1/4" Polypropylene tubing
Method of feeding
Gravity or Pressure
Supplied Water Pump
Maxi-Jet 400
Last edited:
