LiquidCache
New member
Okay, so here's the deal. Once someone says yes they want the tank, then i'll have to break it down and set up my new tank. So once you pull the trigger you'll have to wait a week or so.
SO, with that said. Here it is.
This is a Marineland retail system. (Like you'd see in Petco)
75 gal AGA (A few small scratches but you can't see them unless you try hard)
All metal stand. Everything BUILT IN. Chiller, pump, UV sterilizer (Removed currently because it needs a bulb) power strip, feeder timer, thermostat. Basically this is a plug and play tank setup.
I removed the original pump which I still have, and put a Grundfos quiet one pump in its place, since it's dead silent. I have modified the drain to a full siphon setup, with a float switch that shuts off the main pump if the level rises 1 inch above normal. I have also modified the return from the sump. The pump feeds up behind the back of the tank, and the original return I have made into an emergency drain. All of this can be set back up to the normal durso overflow style in about 2 minutes, but as it sits the tank is DEAD silent. You can hear a pin drop while you're standing in front of it it's so quiet.
Everything you see in the pics EXCEPT for the lights and powerheads are included. I may keep the skimmer too, but I'm not sure yet..(And obviously not my livestock, i'm keeping that!)
The hood I made myself, and it's a good looker from a few feet away, but it's not a show piece by any means. I cut holes in the top for a pair of D120s.
Asking $750 OBO. Don't like that price? Make me an offer! It's a NEAT little setup. Everything works great.
Pics incoming!
SO, with that said. Here it is.
This is a Marineland retail system. (Like you'd see in Petco)
75 gal AGA (A few small scratches but you can't see them unless you try hard)
All metal stand. Everything BUILT IN. Chiller, pump, UV sterilizer (Removed currently because it needs a bulb) power strip, feeder timer, thermostat. Basically this is a plug and play tank setup.
I removed the original pump which I still have, and put a Grundfos quiet one pump in its place, since it's dead silent. I have modified the drain to a full siphon setup, with a float switch that shuts off the main pump if the level rises 1 inch above normal. I have also modified the return from the sump. The pump feeds up behind the back of the tank, and the original return I have made into an emergency drain. All of this can be set back up to the normal durso overflow style in about 2 minutes, but as it sits the tank is DEAD silent. You can hear a pin drop while you're standing in front of it it's so quiet.
Everything you see in the pics EXCEPT for the lights and powerheads are included. I may keep the skimmer too, but I'm not sure yet..(And obviously not my livestock, i'm keeping that!)
The hood I made myself, and it's a good looker from a few feet away, but it's not a show piece by any means. I cut holes in the top for a pair of D120s.
Asking $750 OBO. Don't like that price? Make me an offer! It's a NEAT little setup. Everything works great.
Pics incoming!
