FS : Several reef items

[Sparkss]

We have 1 single 250W PFO HQI that was in use for less than 1 year. (was used for our prop tank, that we took down earlier this year)
http://www.marinedepot.com/md_viewItem.asp?idproduct=PF1631
$140

and 1 dual 250W PFO HQI, used for 3 months (before we moved up to 400W lighting).
http://www.marinedepot.com/md_viewItem.asp?idproduct=PF1632
$300

Both ballasts are like new condition, neither has been exposed to water or any other caustic elements.


We have a 110g acrylic tank that is suitable for use as a sump. It is 72"L X 18"W X 20"T.
$110
I will even through in the approx 30g tank sitting on top of it. It served as our first prop tank for over a year. I kept it for the purposes of setting it up as a RDSB. It seems perfect for this function, it is just deep enough for a 6" sand bed w/ 4" of fast moving water flowing over it.

15W Aqua UV, used less than 3 months (might need it's quartz sleeve cleaned though). Tested all intact (IE: no broken sleeve).
$120
Plumbing in picture is included
http://www.marinedepot.com/ps_ViewItem~idProduct~AV2151.html

A like-new Reeflo Dart that has never seen water that I can recall.
$150
I will even through in the plumbing seen in the picture, etc
http://www.marinedepot.com/ps_ViewItem~idProduct~MM1136.html

It gave up it's cord to help out another pump. I can install a new cord for $165, or sold as is and someone could install one for just a few $$s themselves.


An LAIII mini w/ 250W bulb and PFO quick connect cord. I think that the bulb is an XM 10K. It is about 5 months old.
$110

 

[Sparkss]

An AC Jr w/ DC8. We received this earlier this year as part of a tank buyout. The previous owner said that he thought the DC8 had an outlet that was acting up (Outlet #5). I had not taken the time to verify if it was the outlet (and get it warrantied) or if it was just a programming issue (it is not uncommon for a programming erro, IE: errant timer entry, to cause an outlet to "appear to act up").
It is backlit, but does not have the serial port.
$140
http://www.marinedepot.com/ps_ViewItem~idProduct~NS1163.html

75 GPD RO/DI unti (at least I think it is). It included an auto-shutoff valve setup and it otherwise in good shape. I am sure that the carbon and filter needs to be replaced, but the membrane has only got about a years usage on it, so plenty of life left there. I had scavenged it for parts for our current RO/DI setup, so it needs to be "connected" back together.
$50
I will also throw in another 2 stage RO only setup that we have.

An IC 660 ballast, harness and heatsink
$90
http://www.marinedepot.com/ps_ViewItem~idProduct~IC1121.html

Pinpoint wireless thermometer
$20
http://www.marinedepot.com/ps_ViewItem~idProduct~AM1131.html

Pinpoint Calcium monitor
$120
http://www.marinedepot.com/ps_ViewItem~idProduct~AM1121.html

Pinpoint PH monitor
$25
http://www.marinedepot.com/ps_ViewItem~idProduct~AM1111.html

Neither one has a probe, but I do have at least one a/c adaptor for the Pinpoint monitors (http://www.marinedepot.com/ps_ViewItem~idProduct~AM1421.html)

Pinpoint Dual Stage Temperature controller
$120
http://www.marinedepot.com/ps_ViewItem~idProduct~AM1713.html

(2) Phosban reactors
$30
http://www.marinedepot.com/ps_ViewI...ne__Specialty_Phosphate_Reactors~vendor~.html

 

[Sparkss]

Mag-drive 24 (tested it this afternoon. I will also through in the plumbing shown in the picture, it desired)
$80
http://www.marinedepot.com/ps_ViewItem~idProduct~DN1133.html

Via Aqua 200W titamium heater
$15

(2) 50W heaters
$10

Tunze 6200.5 magent holder - up to 19 mm (3/4")
(unopened box)
This box is still taped shut. We ended up not even using this magent.
$40
http://www.marinedepot.com/ps_ViewItem~idProduct~TZ1573.html

An empty 500g drier tube and a full smaller one
$20
http://www.marinedepot.com/ps_ViewItem~idProduct~RS3693~tab~1.html

Berlin Hang-On Acrylic Mount (I may have a filter sock for this, but I didn't see one when I was out in the garage this afternoon)
$20

 

[Sparkss]

Summary


single 250W PFO HQI $140
dual 250W PFO HQI $300
110g acrylic sump (+35g sump) $110
15W Aqua UV $120
Reeflo Dart $150
LAIII mini w/bulb $110
AC Jr w/ DC8. $140
75 GPD RO/DI (+ spare RO) $50
IC 660 ballast $90
Pinpoint wireless thermometer $20
Pinpoint Calcium monitor $120
Pinpoint PH monitor $25
Pinpoint Dual Stage Temp controller $120
(2) Phosban reactors $30
Mag-Drive 24 $80
Via Aqua 200W titamium heater $15
(2) 50W heaters $10
Tunze 6200.5 magent holder $40
Air drier tubes $20
Berlin Hang-On Acrylic Mount $20

All prices are OBO. We will also consider combination deals (IE: the LAIII + the PFO ballast). We are located in East Bay (Oakley/Brentwood area), but we periodically get into the Concord area and would be willing to meet up if enough items were being bought (just being honest there ).

 

[revenant]

I'll take the Via Aqua titanium heater.... yay for dry hand heat adjustments. I was planning on heading your way Sat anyways. I'll bring $$

 

[Sparkss]

sounds good, I will mark it sold. I have to dig but I think I have a 250W one I will give you also, but no promises .

 

[jo kerpaly]

pm'ed

 

[rafael13]

pm'ed

 

[Sparkss]

All PMs replied to

 

[650-IS350]

WOW sparkss cleaning up the garage or something ???

 

[Sparkss]

yup.. all of the equipment from our old tank, and some new that we had bought then went in a different direction with things (lighting, etc). We wanted to wait to seel everything until our new "choices" had a chance to burn in and see if we liked them.

Speaking of our tank, I should be posting an update to our thread later on today. I took some pictures last night before lights out, including an FTS

Also, I need to remove the PH monitor from the FS list, I think I promised that to Mike a couple of months back, but we just never connected for me to get it to him. I will need to confer with him before I can sell/trade it.

 

[650-IS350]

will check out the tank build thread thanks.

 

[Sparkss]

Summary


single 250W PFO HQI SOLD
dual 250W PFO HQI $300
110g acrylic sump (+35g sump) $110
15W Aqua UV $120
Reeflo Dart $150
LAIII mini w/bulb SOLD
AC Jr w/ DC8. $140
75 GPD RO/DI (+ spare RO) $50
IC 660 ballast $90
Pinpoint wireless thermometer $20
Pinpoint Calcium monitor $120
Pinpoint PH monitor PROMISED
Pinpoint Dual Stage Temp controller $120
(2) Phosban reactors SOLD
Mag-Drive 24 $80
Via Aqua 200W titamium heater SOLD
(2) 50W heaters $10
Tunze 6200.5 magent holder SOLD
Air drier tubes $20
Berlin Hang-On Acrylic Mount $20

All prices are OBO.

I took the PH monitor off the FS list because I remembered promising it to Mike in SF (at least I think I did).

 

[Sparkss]

Everything listed above still for sale.

We also have a PFO Metal Halide Quick Disconnect with 8 Foot Cord - No Socket for sale. Still wrapped up from when we bought it (and never used it)
http://www.marinedepot.com/ps_ViewItem~idProduct~PF2813.html
$5

 

[kurplunk]

pm sent

 

[sfsuphysics]

Tom: Temperature controller actually not pH monitor. But as the price difference between those two is quite significant I won't hold it against you if you sell it, having a baby is expensive stuff I hear

 

[Sparkss]

Doh!!! I was so sure it was the PH monitor.. sorry .. if no one buys it we can work out some sort of a frag-for-equipment trade, but I would like to hold out for cash if at all possible, but I will do my best not to leave you hanging .

EDIT : All PMs replied to

 

[Sparkss]

Summary


single 250W PFO HQI SOLD
dual 250W PFO HQI $300
110g acrylic sump (+35g sump) $110
15W Aqua UV $120
Reeflo Dart $150
LAIII mini w/bulb SOLD
AC Jr w/ DC8. $140
75 GPD RO/DI (+ spare RO) SOLD
IC 660 ballast $90
Pinpoint wireless thermometer $20
Pinpoint Calcium monitor $120
Pinpoint PH monitor $25
Pinpoint Dual Stage Temp controller $120
(2) Phosban reactors SOLD
Mag-Drive 24 $80
Via Aqua 200W titamium heater SOLD
(2) 50W heaters $10
Tunze 6200.5 magent holder SOLD
Air drier tubes $20
Berlin Hang-On Acrylic Mount $20
PFO connector cable $5

All prices are OBO.


PH monitor back on.

 

[sfsuphysics]

Man do I ever want to do something freaky with that 110g acrylic tank... like glue that tank to my tank to make one long 12 foot long tank then buff out all the imperfections..

*slaps hand* BAD MIKE!

 

[Sparkss]

LOL... too bad there are alot of imperfections (IE: scratches). Otherwise it is a sound tank. Not sure what your plan would do for it's structural integrity though