GHL Mitras Club

[meshwheel]

its 4" wide at the narrowest, and 14" wide in the back. Do you think it will be ok, or should I drill holes? I hate to have to do that.

Thanks

 

[reefmutt]

If you hang the Mitras parallel to the tank, you should be fine.
You'll have to keep that centre brace clean but really, what choice do you have?
One Mitras will cover the tank pretty nicely, I think
I really don't know about drilling holes... Not sure it will help much..

 

[AQD_ottawa]

Important announcement for Profilux and Mitras owners

http://reefcentral.com/forums/showthread.php?p=22048651#post22048651

For non ProfiLux owners an announcement on the HUB will come soon enough.

 

[dcmartinpc]

Important announcement for Profilux and Mitras owners

http://reefcentral.com/forums/showthread.php?p=22048651#post22048651

For non ProfiLux owners an announcement on the HUB will come soon enough.

This is excellent news! 1 step closer to the HUB!

Don

 

[dcmartinpc]

Mitras 6100HV Project

Mitras 6100HV Project

Here is the latest project I am trying for my Mitras 6100HV.

https://db.tt/SqJ3ySX2

Would some of the more seasoned Mitras users be willing to review it and let me know your thoughts?

I am running it on a 60 cube on High Output mode at %75. I am running clouds every 30 seconds with a max dimming of %20 to acclimate everything in my tank. Thanks for the idea reefmutt!!! I think I will run clouds every time I add new corals to the tank and gradually decrease the dimming over time, at least until GHL adds the acclimation function to the firmware

My Mitras is 12" off the water and I am also running (4) 24w T5s with it to smooth everything out. They are 2 ATI Blue+ and 2 Giesemann Pure Actinic.

I appreciate any feedback and thanks!

Don

 

[_Aaron_]

I don't have any spare card sockets left for the wireless card on my 3.1N

 

[AQD_ottawa]

time to invest in a an expansion box

 

[_Aaron_]

When it says dual cards, are they a 2 in 1?

 

[MSHUR]

Michael,
PWC is not suported by EB. thats what Matthias have told me, cause i have the same issue. no more slots left. he told me that PWC can only work from controler. i will transfer PH card to EB to free up slot for PWC

mike

 

[AQD_ottawa]

Yep just transfer the card over, no issues, are you ordering one?

 

[MSHUR]

i will but i need to confirm one thing.. profilux will be located about 10-12" down in fish room so i wondering if PWC will work .

 

[AQD_ottawa]

10-12" is no issue thats small distance. if you mean 10-12' we can only give same answer all wireless device manufacturers give "depends on enviromental factors" thick walls steel frames other interference from other wireless devices.

In theory no issue, but everyones house is different.

 

[reefmutt]

Here is the latest project I am trying for my Mitras 6100HV.

https://db.tt/SqJ3ySX2

Would some of the more seasoned Mitras users be willing to review it and let me know your thoughts?

I am running it on a 60 cube on High Output mode at %75. I am running clouds every 30 seconds with a max dimming of %20 to acclimate everything in my tank. Thanks for the idea reefmutt!!! I think I will run clouds every time I add new corals to the tank and gradually decrease the dimming over time, at least until GHL adds the acclimation function to the firmware

My Mitras is 12" off the water and I am also running (4) 24w T5s with it to smooth everything out. They are 2 ATI Blue+ and 2 Giesemann Pure Actinic.

I appreciate any feedback and thanks!

Don

Hey Don.. I think that I would have to load that file into my friends' lap top to view the program, so I can't say that I will ever be reviewing it..
Sorry..

 

[MSHUR]

Sorry, 10-12' ..i do have extra foam insulation between floors and walls.

 

[AQD_ottawa]

Sorry I didn't saw this. As I was aware of, the GHL products have been available almost simultaneously on all continents. May be one week plus minus or so, except the Mitras, that was a bit longer doo to the big demand. I'm mistaken?

Nevertheless Americans can order from EU online shops if they don't mind the shipping. ;-)) sorry AQD_ottawa ;-))

No you cant! it does not allow for USA shipping sorry!

 

[AQD_ottawa]

I was wondering how far apart the pucks are spaced from left to right. This is important as I have a center brace on my acrylic tank top. It should not be a problem but I would like to know.
Also, where can I order the light for 999.00 ?

Thank you

sorry for late reply

the pucks are 5" apart center to center and the fixture is 13.15" long

www.ghlna.com has a dealer finder but online there is
http://coralmall.com/product-category/ghl-2/lighting-supplies/

 

[Keyvan S]

Any update on release date for Wireless PC USB adapter (for the none Profilux owners) Having to connect the USB cable to my lights is getting pretty annoying.


KS

 

[AQD_ottawa]

when we have a date this thread will be the first to know, nothing from GHL as yet however. They are finalizing the Profilux one first.

 

[MontyJack]

No you cant! it does not allow for USA shipping sorry!

I doubt that, sorry.

But what ever it's not matter related, so sorry.

 

[AQD_ottawa]

Please go to the GHL store link add the product to the cart and try and select USA as a shipping country, its not listed, only European countries are.

We are the distributors for North America so work with GHL directly for all products at this time its not a listed product, the biggest issue is shipping size at an affordable rate that makes the product commercially viable.