GHL Mitras Club

36x2 is 72 so you are short by a minimum of 10" so it depends if you keep sps specifically at the out edges, if not then you may be ok
 
I don't have any coral right now, but I have 3 evergrow D120's (my 3rd different LED set in 2 years) in what's now a FOWLR 265g I'd like to change to a SPS dominant reef, but I want my next lights I buy to be my last... for a LONG LONG time.
 
Since the Mitras are reduced right now and given the fact that you have a 30 inch deep tank, with three openings over it and that you want to have an sps dominated system, I think it's a no brainer.... You need three..
Just sayin' :)
 
Thanks reefmutt! Thanks AQD Ottowa! So one unit will do my 36x18x24 tank with no problems? Any Par graphs I can look at? Does that 999.00 include shipping as well?

Thank you
 
Yes this is a German built product it has a two year warranty (although knowing GHL history of building bullet poof products its a mute point ;) ) and yes it comes with a high quality hanging kit.

If anything did ever go wrong the unit is self repair also, which is awesome, no real down time. But we have never really had that issue.
 
I just thought I'll share this information with you but not in intend to put Matthias in more pressure.

Yesterday he replied on my inpatient post in the German forum that they probably start shipping the PLM-PWC on 4. November.

They probably underestimated the time consuming work on the software.
For functionality of the PWC they had to work on new versions of following:

Mitras FW
ProfiLux FW
PC SW PLC
Mitras CC

Matthias wrote this will be done in two weeks from now. But we should accept if it finally takes a bit longer. To redo all SW must be a PITA!

Thumbs up for the hard work.
 
Last edited:
One should also take in consideration that GHL is really hard working on other products.

They just released the Mitras Light-bar!!!!!

I will definitely have one for my fragtank! ;-))

AQD ottawa, will the light bar be discussed here also, or there will be a new thread?
 
reefmutt said:
the model that is designed for reef tanks is the 6200hv. the old generation is the 6100hv
the new 6200hv has recently seen a price drop to 999.00"¦. i believe..
Click to expand...

You shouldn't think of the 6100/6200 as old vs new version! Ok the 6100 came out earlier but the differences are there to fit the different taste in EU and US. Both are for reefing!
Here in the EU we like it more natural, not so blue.

Hay, not saying so we like hairy women over here! Ok?! :-))

Sorry, the humor is different here two...
 
AQD_ottawa said:
The light bar is not scheduled for release in the USA or Canada market for some time sorry.
Click to expand...

Sorry I didn't saw this. As I was aware of, the GHL products have been available almost simultaneously on all continents. May be one week plus minus or so, except the Mitras, that was a bit longer doo to the big demand. I'm mistaken?

Nevertheless Americans can order from EU online shops if they don't mind the shipping. ;-)) sorry AQD_ottawa ;-))

By the way, is ordering something from the EU the same PITA like if we from the EU order in the US?
We pay the price (including VAT) shipping (of course) and EU import tax (up to 10%) and VAT (in CZ 21%)
 
I was wondering how far apart the pucks are spaced from left to right. This is important as I have a center brace on my acrylic tank top. It should not be a problem but I would like to know.
Also, where can I order the light for 999.00 ?

Thank you
 
Mattiejay6 said:
How easy is it to program the mitras ? Is there pre programs? Trying to decide between the mitras or pacific sun
Click to expand...

When I was looking for lights about a year ago, I liked the pacific sun and was impressed but I heard bad things about the quaity control and I thought about shipping it back, if there were issues..
(Take that with a grain of salt as it is in the Mitras thread..)
The Mitras does have a program loaded into it. Programming is actually quite simple.. Once you've played with it a little. This is coming from a guy who is a computer idiot. After a few heated midnight email exchanges with Michael, I finally got comfortable and now have no problems programming the lights.
There are several utube videos explaining it..
I'm sure Michael will have links..
Also, keep in mind that the mitras are owner serviceable so if there were an issue (I don't think these lights have any issues) you could fix it yourself..
 
meshwheel said:
I was wondering how far apart the pucks are spaced from left to right. This is important as I have a center brace on my acrylic tank top. It should not be a problem but I would like to know.
Also, where can I order the light for 999.00 ?

Thank you
Click to expand...

Th width of the two pucks is just under 6 1/4 inches. There is about a 2 1/4 inch space between the pucks which are 1 7/8 inch wide each.
Michael will have to answer your second question..
 
Matt,
Thank you for measuring for me. Thank you very much! Here is a pic of my 65 gallon acrylic tank top. I think it should be fine, but would like your opinion as I cannot find one in my area (Southern California) to go look at in person.
My tank is 36x18x24 deep. Here is the tank top pic.
 
You must log in or register to reply here.

Similar threads

BigAl2007
GHL Mitras - How are you mounting them?
Replies
2
Views
584
BigAl2007
BigAl2007
jay505
Is STARS still an active club
Replies
3
Views
158
griss
griss
Altpers0na
Jebao return pump
Replies
10
Views
547
Altpers0na
Altpers0na
Brian60077
Building another new tank
2 3
Replies
49
Views
2K
Brian60077
Brian60077
B
ReefBot Lab
2
Replies
27
Views
2K
jemichboy
jemichboy
Back
Top