GHL Mitras Club

bobafet1 said:
Any idea how much the clusters are? These are things I'd like to know before diving in. I'm running AI Sol's and I've had to replace pucks quite a bit because LEDs, that are suppose to run for 1000's of hours, keep burning out.


How long have LX7's been out? I believe diodes on the Sol's started burning a year or so after release.
Click to expand...

The replacement clusters are about $60 a piece. Not sure if the LX7 ones are available yet.

https://www.aquariumcomputer.com/usa/product/2-pcs-main-led-boards-for-mitras-lx-6300/
 
Desert Sea said:
The replacement clusters are about $60 a piece. Not sure if the LX7 ones are available yet.

https://www.aquariumcomputer.com/usa/product/2-pcs-main-led-boards-for-mitras-lx-6300/
Click to expand...

Good find. That's actually $60 for a pair! I'd expect the LX7 clusters to be similarly priced.

bobafet1 said:
Thanks for the info.

I noticed Premium Aquatics doesn't have any in stock. Any other vendors out there with some in stock or is everyone waiting for a US shipment to come in?
Click to expand...

Not sure. Have you tried contacting Premium Aquatics or GHL USA to find out when they expect more or if they have more in route? GHL USA may have stock. If not, I think they get shipments every month or so in which case, if they are in fact out of stock, it could just be a matter of days before the next shipment arrives.
 
slief said:
Good find. That's actually $60 for a pair! I'd expect the LX7 clusters to be similarly priced.



Not sure. Have you tried contacting Premium Aquatics or GHL USA to find out when they expect more or if they have more in route? GHL USA may have stock. If not, I think they get shipments every month or so in which case, if they are in fact out of stock, it could just be a matter of days before the next shipment arrives.
Click to expand...

It's too bad you're so so far away from me. I'd like to see these in action before taking the plunge. Anyone closer to the I.E. have some Mitras I can check out?
 
I have the previous model 6200hd and it's been running 2 years without any problem except for some paint that chipped on the casing.
72f464be39f4ba45197c2763a90da66d.jpg



Sent from my iPhone using Tapatalk
 
Wound up going with 3 LX7206. Ordered them a few weeks ago and they are set to arrive next week. Going in search of a good project, if anyone has one they would be willing to share.

New tank, so going to start with mostly LPS and then dip into the SPS when it is well established.

Thanks,
Mike
 
I tried transmitting my Light project and says Data transmission successful, but it does not transmit over? When I do test illumination run, the time that is suppose to be off is on, which mean it is still running my old schedule.

Nevermind, I remade the project and it worked. Might been some kind of error or glitch.
 
Last edited:
Can someone please advise what the bold thread pattern is for mounting the lights? I'm working on my mounting configuration so I wanted to be sure I have the right components.
 
M4 and the bolt holes are 17 cm apart.

I did an fully adjustable mounting system using 8020, with the 1020 profile.

attachment.php


Got my lights running today. How do I turn on the lunar lighting and program/turn on the clouds?

Thanks!
 

Attachments

  • Mitras LX 7206 up and running.jpg
    Mitras LX 7206 up and running.jpg
    45.8 KB · Views: 7
I have a few questions please:
1. Why doesn't the clock stay in sync with my PC
2. Why don't my communications settings save? More specifically, when I try to connect via wireless I get a connection error. It seems to default back to USB connection therefore I have to manually select wireless and choose my assigned static IP.
3. Has anyone had issues with GCC crashing intermittently? I'm running the program from explorer on a surface pro. GCC has crashed on me at least 6 times today
 
WCKDVPR said:
M4 and the bolt holes are 17 cm apart.

I did an fully adjustable mounting system using 8020, with the 1020 profile.

attachment.php


Got my lights running today. How do I turn on the lunar lighting and program/turn on the clouds?

Thanks!
Click to expand...

bobafet1 said:
I ended up going with the 1010 profile. It's great how the power cables tuck right into the 80/20 channels.
Click to expand...

I was wondering if either of you could link me to the dimensions of the aluminium extrusions, please? I can only seem to find 20 series an upwards.
 
Mitras 6200 Menu is squirrelly

Mitras 6200 Menu is squirrelly

Hi - Hoping someone can point me in the right direction. I have a 6200 which I have programed using the fixtures on board menu only. When I touch the check mark or the X the menu begins to flash and scroll quickly thru all of the options. It eventually stops and displays the light / color output levels as it should. I tried unplugging it for a couple of minutes but that didn't seem to help. Does anyone know if there is a factory reset process or have any other ideas as to what is going on and how to remedy this? Thanks
 
You must log in or register to reply here.

Similar threads

BigAl2007
GHL Mitras - How are you mounting them?
Replies
2
Views
557
BigAl2007
BigAl2007
jay505
Is STARS still an active club
Replies
3
Views
62
griss
griss
Altpers0na
Jebao return pump
Replies
10
Views
435
Altpers0na
Altpers0na
Brian60077
Building another new tank
2 3
Replies
49
Views
1K
Brian60077
Brian60077
B
ReefBot Lab
2
Replies
27
Views
2K
jemichboy
jemichboy
Back
Top