Gimmito's 450 L-Shaped Display

and of course to clean the tank...one serious Great White acrylic magnet cleaner.


photo-91.jpg
 
Wooow... great build, the quarantine setup looks awesome. Do you have some wide angle pics of the garage - sorry, I mean fish room - to see how it all fits together?
Can't wait to the the aquascape you'll pull of with that kind of tank :)
 
Briniel said:
Wooow... great build, the quarantine setup looks awesome. Do you have some wide angle pics of the garage - sorry, I mean fish room - to see how it all fits together?
Can't wait to the the aquascape you'll pull of with that kind of tank :)
Click to expand...

Since I only have a one car garage the other side is only cabinets, tank less water heater, and electrical service panel...nothing sexy. I'll post a picture of the whole garage once I finish the fishroom. ;)

I was thinking of using chemgrate for the base of the rock scaping, but it's some pricey stuff. I ended up ordering 2 dozen 1 1/2" cross tees and will use schedule 80 for the platform.
 
photo-103.jpg


Here's a pic of some nice Fiji rock I picked up from Ted (ExtremeReefer) and Bill (CookieJar). They range from 15 lbs to a whopping 40 lbs on the one on the bottom. This bring my total to about 300 lbs and I think I'm good to go once I get my rockscaping materials.
 
photo-106.jpg


A pic of the new rock curing. I finally got to see the H&S A110 in action...its been pulling some nasty stuff out.
 
photo-105.jpg


I also got a chance to install the fire rated doors w/my bud Ethan. For those of you thinking of doing a in wall tank from a living room to the garage, you must maintain a 1-2 hour fire rated door in the garage ....and it ain't cheap.
 
photo-110.jpg


I started plumbing the qt. I'm using a Eheim 1260 with about 6 feet of head to the top of the tank. I'm teeing off the pump to feed the H&S skimmer and was planning to tee off for the uv sterilizer. I could place the uv sterilizer above the sump or up right before the first inlet. Any thoughts or should I just scrap the uv sterilizer idea ?
 
photo-113.jpg


I bought a couple of 1" Sea Swirls for the frag tank. I'm using a Eheim 1262 for the return. I'll be teeing off the pump to feed the H&S skimmer also. I'm debating whether to hard plumb the Sea Swirls or use grey spa flex...any thoughts ?
 
photo-114.jpg


My buddy Ethan finished installing the FRP. You'll notice three 1" holes on the top left for the inlet/outlet for the 40 gallon fuge. I'm also using uniseals to cover up any holes I make as well to help keep the resonance at bay. I have an extra hole in case I add something else down the line.
 
photo-119.jpg


I was off today and went to Aquarium Showroom to pickup a bigger sump for my frag tank. Max had a roughly 50 gallons used eco system sump for sale. I dropped it off at Gen's to patch a bulkhead and give it some elbow grease. I met Jose (Blue Voodoo) and shot the breeze until Gen got back (cool guy). I also picked up 2 Lumenmax Elite reflectors at Aquarium Showroom for the frag tank. I hope to get Gen to make a light rack for the FT also.
 
You must log in or register to reply here.

Similar threads

A
DRILL aquarium only 1 DownPipe?
Replies
0
Views
47
Andrés Garza
A
A
DRILL aquarium only 1 DownPipe?
Replies
0
Views
48
Andrés Garza
A
S
Looking at building a diy wood tank and stand
Replies
1
Views
638
Vinny Kreyling
Vinny Kreyling
C
High Zinc in ICP Test & Switching to ATI Essentials – Need Advice
Replies
17
Views
2K
Reefing102
Reefing102
BigEZ77
Urgent Help Requested - Wrasses Won't Come Out - CB Blue Tang Arriving Today (NO QT)
Replies
7
Views
308
BigEZ77
BigEZ77
Back
Top