Hardware & firmware wish list

MSHUR wrote:
"Matthias, is it possable to add a photometer for NO3and Po4 .Elos came out with this option. I did see it at MACNA"

The problem is that these probes are very expensive (if they are high quality and suitable for permanent measurement). And we don't accept a compromise.
The hardware of ProfiLux is prepared for this kind of measurement (BTW: ProfiLux is prepared for nearly anything).
We are still in research...
 
I know i asked this prior, But better controll over tunze's.
Expanded i would like to be able to controll individual pumps, and be able to have them change modes at certain times.
Thanks Matthias.
 
Ohhh now i just have to download it.
I didnt see that listed.
Thanks Matthias!!
 
1: how about level sensors having control over individual sockets , as in low level in sump turn off heaters until level corrected.

2: restart delay on individual sockets after powercut
 
Matthias,

Depending on how expensive the probes for continuous and accurate measurement of Ca, Alk, NO3, Po4 really are, some of us may be willing to pay these kind of prices for these options. How about coming out with a limited amount of modules/probes that can perform these functions on the Profilux.These unique features would not be for the average user but at least the options would be there for some of us.

Many thanks...
LRS
 
<a href=showthread.php?s=&postid=11160379#post11160379 target=_blank>Originally posted</a> by Matthias Gross
not too fast ... 3.06 is not published yet - comes in 3 days!
Click to expand...

LOL I seen that after i posted. ;)
I have not been updating till the tunze updates were set.
Thanks
 
LRS,
i try to calculate the appr. price and post it here. Let's see how the feedback will be.

jbb
1: we will have programmable logic soon, then you can create all the functions you need
2. comes
 
thanks matthias
that keeps me happy
heres some more idears
1: a blank remote module that connect to the pofilux via a com's cable to allow for connection of sensors and plugbars ,for those people that have equipment some distance away.(only one cable between).
2: programable buttons on the front of the viewII
3: current sensor to fit between the plug bar and the item to prov that the item is running (pump status)
 
Matthias,

Can you make it control Vortech Pumps?

What about being able to send a sms text to say the tank had a power cut. we get lots of power cuts so this would be useful.

What about a sensor etc, that can tell you how much power your tank is using.?
 
Last edited:
A profilux remote control for basic functions so I dont have to get up to mess with my profilux. Could actually be IR to the base unit

Dimmable MH ballasts?
 
Want want want, i dunno:p

With respect to dimmable HQi's the profiLux will already dim ANY dimmable ballast as long as it has a 1-10V control line.

So check your ballasts, you may already be sitting on one of your own wish lists.

I am going to be starting a thread in respect to dimmable stuff soon.
 
With regards to dimmable ballasts, here is a little known or rather over looked fact

ProfiLux WILL control ANY dimmable ballast as long as they have a 1-10 Volt interface, so if you can find a retailer that stocks them you are not far off your request from Santa
 
You must log in or register to reply here.

Similar threads

R
Black Screen Issue with Aquarium Camera or Smart Lighting App
Replies
1
Views
72
griss
griss
Nanook
Reefbreeder Photon V2+ 50” fixtures FS (5 of them)!
Replies
3
Views
118
Nanook
Nanook
R
DIY AI-coded ESP32 based aquarium controller
Replies
0
Views
242
ronnyking
R
F
New Reef - Need recommendations
Replies
11
Views
259
wvned
wvned
Uncle Gillbert
New Red Sea 950S Peninsula
Replies
8
Views
262
JohnL
JohnL
Back
Top