Help Needed with Radions

[M3P]

I keep receiving the following error: "An Error occured while programming your daily schedule. Please try again."

Anyone know how to resolve this? I have tried rebooting each radion as well as factory resets. I have also tried running ecosmartlive in firefox, chrome, and safari without any luck.

 

[chucklez]

When I had an issue programming my radions it ended up being my anti virus. If you have any on disable it and close your browser then try again.

Sent from my SM-G928V using Tapatalk

 

[Aqua Man 07]

running them off the apex is way easier. but you need the wxm

 

[M3P]

Wxm is already in the mail. I may just wait for that, cause this has already wasted enough time.

 

[Aqua Man 07]

Just calibrate them while you wait. Lol

 

[M3P]

Just calibrate them while you wait. Lol

calibrate?

 

[Aqua Man 07]

you can calibrate them on ecosmart live.

 

[Tigé21v]

Wxm is already in the mail. I may just wait for that, cause this has already wasted enough time.

If I had a penny for every minute of my life I've wasted trying to figure out something technologically-based.....
I've finally raised the white flag on integrating my webcam into my Fusion.
Life was so much easier in the Eighties.

 

[Saltygram]

Took me a while and lots of luck.

I would suggest getting a 5th grader.

 

[Aqua Man 07]

i had to dig out the old laptop with xp on it for everything to work on ecosmart live to calibrate them. i was gonna do the traveling sun on there but did not like the ecosmart programming.

 

[rams]

My best advice with that error is to keep trying. Make sure the software it up to date on the Radion first. They are a really cool light once you get it setup. Operating system isn't the problem. I've used MS WIN10 and OS X El Capitan recently. The problem in my opinion is EcoSmart Live aka D'Smack Live waking up and recognizing the light.

 

[M3P]

Got everything linked up to the WXM. Now to figure out best way to program for SPS

 

[dendrite]

I have often had the same issue, and always with the same light out of five, failing to program. I have tried disconnecting each light for thirty seconds, disconnecting reeflink for thirty seconds, restarting my computer and running either safari or firefox, but what seems to work best is disconnecting reeflink for thirty seconds and retrying either late at night or early morning when few others are running ESL. I try to avoid reprogramming the lights like the plague. Every couple of months I recalibrate

 

[dendrite]

Also make sure to disable the control buttons on the lights themselves

 

[Aqua Man 07]

here you go m3p check this out it was posted in a thread in the sps keepers forum i asked for pointers on a strictly radion setup for sps.
http://ecotechmarine.com/wp-content/uploads/2016/01/Ecotech_CoralLab_WP1.pdf

 

[Aqua Man 07]

Im running a modified phx14 through apex. you got to manually adjust your spectrum but its not to bad since you can program 1 and copy it to the other lights on apex. by the way i used the same idea as you on setin the lights on top of the canopy

 

[Aqua Man 07]

You get a chance to look at the link I posted. Did it help a little?

 

[M3P]

Yeah definitely. I ran phoenix 14k on my last tank, so that will help to mimic those bulbs. I will probably run 18k-20k in evenings

 

[Scubareefman]

I use my phone with the app to program my lights and pumps. I find it easier than running them off my apex.

 

[M3P]

I use my phone with the app to program my lights and pumps. I find it easier than running them off my apex.

Which app?