I wanted to add some additional ports for 1-10V connections. Currently my L1-L4 are taken up by lights, but i would like to have additional ones for my tunze pumps. Is there an expansion module that just adds these? I don't need all the other stuff. I currently have a P2 plus with the P3 upgrade ( i guess that just makes it a P3???)
Help on choosing expansion
- Thread starter g8gxp
- Start date
AQD_ottawa
New member
Hi
Yes you have two options.
1. the PLM-4L expansion card this gives you 4 extra ports
or
2. the EX upgrade kit this gives the following
Salinity port
Redeox port
L5L6 (two extra ports)
Level 3
Upgrading to profiLux 3 does not by default give you any extra L ports it will however give you acces to unlimited amount of L ports if you fit further L port expansion cards.
Hope that helps
Yes you have two options.
1. the PLM-4L expansion card this gives you 4 extra ports
or
2. the EX upgrade kit this gives the following
Salinity port
Redeox port
L5L6 (two extra ports)
Level 3
Upgrading to profiLux 3 does not by default give you any extra L ports it will however give you acces to unlimited amount of L ports if you fit further L port expansion cards.
Hope that helps
Similar threads
