Help with 7096

[reefernutz]

I've got 2 6105s running on a 7096. I'm trying to get pump 1 to run at 100% while pump 2 runs at 30%, and then pump 1 to drop to 30% while pump 2 jumps to 100%. I don't want to use the wavemaker option because I want a longer interval than that offers.

I currently have it on "pulse only" with the pumps plugged into ports 1 and 2 and the alternating power settings. However, it looks to me like the pumps are just on full all the time. Help please.

 

[rvitko]

If you set it for pulse mode with port 1 at

30
100

and port 2 at

100
30

it should do just that. Make sure the photocell is in a bright area or night mode is off, otherwise one pump will stay at 30 and the other at 100 and they will not pulse.

 

[reefernutz]

That's what I have it on. Will the 7096 give me any indication of which pump is running full and which is not? I've moved the photocell into the light so nightmode won't kick in.

 

[rvitko]

It is not very clear but the light over each channel dims a little for lower power.