How to adjust a 6055

[BigCol]

As above. The manual shows how to adjust one of the larger streams via the seperate controller but not the 6055.
Where is the turn screw to adjust it.
There is also a voltage regulator on the back of the controllers plastic caseing.
Please advise if you have or know about one of these excellent pumps.
Regards
BC

 

[shawnz28]

If you are refering to the screw on the junction box to set the max speed of the pump there is not one on the 6055. the Max speed is set by the slider voltage switch on the back of the power supply. If you are using a controller with the pump I would set the voltage to 24v

 

[BigCol]

Can this be turned down a little using the slider and still use the controller

 

[BigCol]

As above, and do I need to turn off the pumps electricity supply to make the adjustment.
Regards
BC

 

[rvitko]

You can set both. For example if you set the pump to 24V the range of the controller is roughly 450-1450 gph. If you set it to 12V the range is roughly 200-600gph.

 

[BigCol]

Cheers RV
Regards
BC