how to setup digital powerbar (6) and dosing station to not overlap s5/s6?

[afex]

i have a 6 port digital powerbar installed in the S1-S4 plug

i have a 4 way doser installed in the S5-S8 plug.

the default software causes the S5 and S6 plugs to be shared by both the powerbar and the doser.

how can i set S1-S6 to be my powerbar and S7-S10 to be my doser?

i used the "Program digital powerbar or dosing pump unit..." button to change the numbers of the dosing pump, but it did not seem to change anything.

 

[AQD_ottawa]

daisy chain the doser to the Digi power bar for easier programming and numbering.

Plug the doser into the other western socket of the digital power bar.

But first you need to program it so unplug the digital power bar from S1S4 and plug in the doser, then go to the program digi or doser menu and program as S7-S10.

Unplug from S1S4 plug back in the digital bar and then daisy chain the doser

As we say in England "Job done mate"