Kessil help please

[xclusive252]

Hello all need some help here please. I am helping a friend setup his lights in his new massive tank length 6 foot height 4 foot width 32 inches. He has Kessil KSW500N I believe 3 of them and he wanted to wire then so he can control them via the apex or even the kessil App. He has a dongle and he has a Signal Converter but we both dont know how to wire it. I have looked on the web and there is very little on this. Any and all help would be great thank you in advance.

 

[kharmaguru]

I have not done this but best guess from some research: the signal converter needs to be set to '0-10v to DMX mode'. You will need the Kessil to apex control cable (maybe you already have it) to connect the apex 0-10v port to the input on the signal converter. There should be another cable from the DMX output of the converter to the input of the power supply (maybe you already have it too). That should be it for wiring.

 

[griss]

/griss slowly steps away from this technical/way over his head discussion.

 

[discotu]

Edit...sorry I thought when you said dongle you meant the wifi dongle but the W series isn't compatible so it looks like kharmaguru is poiting you in the right direction

 

[wvned]

It appears the wifi dongle needs the spectral x controller as well as the signal converter. Then it will work.
Instructions are on the Kessil website
https://kessil.com/downloads/W360/User Guide for W360 and W500.pdf