Last of my reef equipment for sale (Apex, MP40es, Vertex RODI and more)

MORE STUFF!!!

An acrylic sump
- in good shape. Dimensions are 15" front to back, 32.25" left to right (outside measurements). Subtract 5/8ths of an inch for inside dimensions.
15 inches deep (top to bottom)
5/16ths thick acrylic, black bottom
One corner has a triangle brace (black) with holes for drip lines
comes with a rubber pad cut to fit (to put under the sump)
I don't know who made it, maybe AA, not sure though.

For sale $80 OBO

IMG_8386.jpg


Probe holder

A nice single probe holder, great condition - $10

IMG_8391.jpg


Tube holder

(for dosers, reactor lines, top off lines, whatever) bubble-magus - $10

IMG_8392.jpg


Mag 7.5

Here is the Mag 7.5, it works like a champ but is kind of loud, it really needs a new impeller so I will let it go cheap - $30 OBO

IMG_8393.jpg


Eheim pump 1048
- 160gph only 10w (needs impeller) - $40

IMG_8394.JPG


32 frag - frag rack

I maybe used it a month, looks brand new - $10

IMG_8395.JPG


EHEIM Everyday Fish Feeder

A great auto feeder, works great - $15

IMG_8397.JPG


Pro Scraper 24" Kent Marine Scraper

Glass/Acrylic Aquarium Algae Cleaner, the metal tip for glass comes with this one is bent, I'd get a new one - $5

IMG_8398.JPG


Hand Held Algae Scraper

Short Kent Marine - This one has an old Plastic Blade for Acrylic Aquarium - $3

IMG_8411.JPG


Eheim pump 1250
- 320gph only 28w (needs impeller) - $50

IMG_8414.JPG


- More coming (I found an ATO, a PH monitor, and some other stuff)
- MikeT
 
Last edited:
EVEN MORE STUFF!!!

Hang On Refugium
- DIY (not me, but holds water fine).
- Dimensions are 4.5" front to back, 16.5" left to right (outside measurements) and 9.5 inches deep (the tank part, there is a back panel with thumb screws that is 10-5/8ths" top to bottom.
- NEEDS NEW O-RINGS for PVC

For sale $10 OBO

IMG_8417.jpg


IMG_8418.jpg


Ebo-Jager 150W heater

great condition, was used for salt mixing only I think - $10

IMG_8419.jpg


Algae Magnets

One Piranha float, crazy strong - needs new felt on the wood side, and probably could use new stuff on the in tank side too. - $10
Two sets of Mag-Float cleaners for Acrlyic (the light blue ones) - $5 for cleaner pair, $3 for the ugly one
One set of the tiny glass mag float - $3

IMG_8402.jpg


IMG_8399.jpg


Sunbright LED tube (T-10 size) with AC cables and clips

This is the Actinic 470blue model. I am pretty sure these are the gen-2 tubes. Crazy bright - $80

IMG_8405.jpg


IMG_8407.jpg


IMG_8408.jpg


New Purple Plus T5 48" bulb
- Never used $15

IMG_8409.JPG


New Coral Plus T5 48" bulb

Basically new - I maybe used it for a day or two - $10

IMG_8410.JPG


ATO

The ATO is from AutoTopOff.com, Sump Mount, this was the spare and was not used very long in a quarantine system. - $30
I'll post a picture soon, just found it.

- MikeT
 
EB8 is sold
Apex system is sold
MP40s are gone
(one is sold, the other I can't find the power supply - it works though)

- Everything else is available
- MikeT
 
MORE STUFF and some new PICTURES!!


The "My Reef Cerations CR-1" Calcium Reactor
Reactor details:

Height of reactor 21"
Reactor Chamber Diameter OD 4 1/2"
Reactor Chamber Thickness 1/4"
Foot Print 10" x 10"
Water inlet size 1/2" Nylon Barb
Water Outlet size 1/4" John Guest Speedfit
Method of feeding Gravity or Pump/powerhead
System capabilities 300 gallons
Pump Mag 3

- Comes with CO2 tank (should be pretty full still - feels it)
- Brand new Aquatic Life CO2 regulator
- A glass and brass bubble counter
- Aqualifter feed pump with hoses and pre filter

New lowered price $200 for everything in the picture.
With a PH probe and a controller this thing can grow corals like gangbusters.

IMG_8404.jpg



PinPoint PH monitor

Needs a probe and a 9v battery - $15

IMG_8412.jpg



Tom's Aqualifter

This one only touched freshwater, tested good - $15

IMG_8413.jpg



Refractometer calibration fluid

First $1 gets it

IMG_8415.jpg



Coral clippers (Boston Aqua Farms)

A little rust, still work though - $10

IMG_8416.JPG



ATO

The ATO is from AutoTopOff.com, Sump Mount, this was the spare and was not used very long in a quarantine system. - $30

IMG_8421.JPG



VorTech Battery Backup

- I have owned this since September 2010, but only set it up in December 2013 (for an xmas vacation), and tore it down with the tank in April 2013
New lower price - $80

IMG_8423.JPG



Eshops Super Spy - picture/look down box

In good shape, good for photography - $15

IMG_8424.JPG


IMG_6295.jpg



- Still have to post a picture of the chillmaster fan setup, I also have a box of random reef junk I should see if someone wants...

- MikeT
 
Bump - reminder all prices are OBO, and discounts if you buy multiple items, etc.

Everything is still available except:
- Apex (and extra EB8) are sold
- The good MP40 is sold (the other is pending either an as-is sale, or I will get a new power supply and sell later)
- The Eheim feeder is sold
- The frag rack is sold

MikeT
 
To make it easier to track what is sold/available here is the latest list:
Some lowered prices in RED

100gpd Vertex RO-DO (with charge pump, built in TDS meter, etc) - New Price - $200
Needle Wheel skimmer (Bubble Magus ES-7 with Sicce pump) - New Price - $180
APEX EB8 = SOLD
APEX System = SOLD
MP40esW = SOLD
An acrylic sump - Dimensions are 15" front to back, 32.25" left to right (outside measurements). Subtract 5/8ths of an inch for inside dimensions - New Price $60
Probe holder - A nice single probe holder, great condition = SOLD
Tube holder - (for dosers, reactor lines, top off lines, whatever) bubble-magus = SOLD
Mag 7.5 - it works like a champ but is kind of loud, it really needs a new impeller so I will let it go cheap - $30 OBO
Eheim pump 1048 - 160gph only 10w (needs impeller) - New Low Price $20
32 frag - frag rack - I maybe used it a month, looks brand new = SOLD
EHEIM Everyday Fish Feeder - A great auto feeder, works great = SOLD
Pro Scraper 24" Kent Marine Scraper - Glass/Acrylic Aquarium Algae Cleaner, the metal tip for glass comes with this one is bent, I'd get a new one - $5
Hand Held Algae Scraper Short Kent Marine - This one has an old Plastic Blade for Acrylic Aquarium - $3
Eheim pump 1250 - 320gph only 28w (needs impeller) - New Low Price $30
Hang On Refugium - For sale $10 OBO
Ebo-Jager 150W heater - great condition, was used for salt mixing only I think - $10
Algae Magnets One Piranha float. - $10, Two sets of Mag-Float - $5 for cleaner pair, $3 for the ugly one, One set of the tiny glass mag float - $3
Sunbright LED tube (T-10 size) with AC cables and clips - This is the Actinic 470blue model. I am pretty sure these are the gen-2 tubes. Crazy bright - $80 OBO
New Purple Plus T5 48" bulb - Never used $15
New Coral Plus T5 48" bulb - Basically new - I maybe used it for a day or two - $10
The "My Reef Cerations CR-1" Calcium Reactor - with CO2 tank, regulator, feed pump and more - $200 for everything in the picture.
PinPoint PH monitor - Needs a probe and a 9v battery - $15
Tom's Aqualifter - This one only touched freshwater, tested good - $15
Refractometer calibration fluid - First $1 gets it
Coral clippers (Boston Aqua Farms) - A little rust, still work though - $10
ATO - The ATO is from AutoTopOff.com, Sump Mount, this was the spare and was not used very long in a quarantine system. - $30
Eshops Super Spy - picture/look down box - In good shape, good for photography - $15
VorTech Battery Backup - I have owned this since September 2010, but only set it up in December 2013 (for an xmas vacation), and tore it down with the tank in April 2013- New lower price - $80

No pictures, but also for sale

Ebo-Jager 250w heater, works - $15
Aquatech Chillmaster fan with 6x silent CPU fans in a row, runs quiet, really cool look - $40

- Thanks,
 
Refugium, Kent scrapers and possibly all the magnet cleaners are pending

- Skimmer reduced price = $180
- Sump reduced price = $50
- Calcium Reactor System reduced price = $180

This is good equipment, send me a PM, I am ready to deal!

- MikeT
 
Sunbright LED is SOLD
Chillmaster fan is SOLD

Refugium, Acrylic magnent cleaners, phirana magnet cleaner, both kent scrapers and the Super Spy are all pending pickup today...

RODI, Calcium Reactor, Vortech Backup, Top Off, Mag 7.5, T5 bulbs, Sump and Skimmer are all still avail (along with some other items)... make me an offer!

- MikeT
 
Hey mike! Bummer your getting out for good but lmk if all the magnets sell. If not I'll take them all. Thanks!
 
Latest list of items:

Avalable items:

Vortech MP40esW (needs power supply, wet side has scratches and rough spots (on the shield), prop works great, dry side looks and tests fine) - $225
Needle Wheel skimmer (Bubble Magus ES-7 with Sicce pump) - New Price - $180
An acrylic sump - Dimensions are 15" front to back, 32.25" left to right (outside measurements). Subtract 5/8ths of an inch for inside dimensions - New Price $50
Mag 7.5 - it works like a champ but is kind of loud, it really needs a new impeller so I will let it go cheap - $30 OBO
Eheim pump 1048 - 160gph only 10w (needs impeller) - New Low Price $20
Eheim pump 1250 - 320gph only 28w (needs impeller) - New Low Price $30
Algae Magnets - One set of the tiny glass mag float - $3
New Purple Plus T5 48" bulb - Never used $15
New Coral Plus T5 48" bulb - Basically new - I maybe used it for a day or two - $10
The "My Reef Cerations CR-1" Calcium Reactor - with CO2 tank, regulator, feed pump and more - $180 for everything in the picture.
PinPoint PH monitor - Needs a probe and a 9v battery - $15
Tom's Aqualifter - This one only touched freshwater, tested good - $15
Refractometer calibration fluid - First $1 gets it
Coral clippers (Boston Aqua Farms) - A little rust, still work though - $10
ATO - The ATO is from AutoTopOff.com, Sump Mount, this was the spare and was not used very long in a quarantine system. - $30
VorTech Battery Backup - I have owned this since September 2010, but only set it up in December 2013 (for an xmas vacation), and tore it down with the tank in April 2013- New lower price - $80

SOLD items:

100gpd Vertex RO-DO (with charge pump, built in TDS meter, etc) - SOLD
APEX EB8 = SOLD
APEX System = SOLD
MP40esW = SOLD
Probe holder - A nice single probe holder, great condition = SOLD
Tube holder - (for dosers, reactor lines, top off lines, whatever) bubble-magus = SOLD
32 frag - frag rack - I maybe used it a month, looks brand new = SOLD
EHEIM Everyday Fish Feeder - A great auto feeder, works great = SOLD
Pro Scraper 24" Kent Marine Scraper - Glass/Acrylic Aquarium Algae Cleaner, the metal tip for glass comes with this one is bent, I'd get a new one - SOLD
Hand Held Algae Scraper Short Kent Marine - This one has an old Plastic Blade for Acrylic Aquarium - SOLD
Hang On Refugium - SOLD
Ebo-Jager 150W heater - great condition, was used for salt mixing only I think - SOLD
Algae Magnets One Piranha float. - SOLD, Two sets of Mag-Float - SOLD for cleaner pair, SOLD for the ugly one
Sunbright LED tube (T-10 size) with AC cables and clips - This is the Actinic 470blue model. I am pretty sure these are the gen-2 tubes. Crazy bright - SOLD
Eshops Super Spy - picture/look down box - In good shape, good for photography - SOLD
Ebo-Jager 250w heater, works - SOLD
Aquatech Chillmaster fan with 6x silent CPU fans in a row, runs quiet, really cool look - SOLD

- Thanks
 
Vortech MP40esW - is Pending

Rest is still available. Starting to think I need to separate the remaining items in separate threads (Sump, Skimmer, Vortech battery backup, Calcium Reactor and ATO).
 
Back
Top