Low Profile 36x24x15 Build
- Thread starter poolkeeper1
- Start date
poolkeeper1
New member
Mp40
Mp40
Absolutly, Love the flow selection especially the fact i don't need someone else to program it. Another switch i made was to the Apex, Still hard to understand (To me) But once the net is up and It's online it very easy to control from my PC ( So me likey)
Hope you guy's are well:thumbsup:
Bill:dance:
Mp40
Absolutly, Love the flow selection especially the fact i don't need someone else to program it. Another switch i made was to the Apex, Still hard to understand (To me) But once the net is up and It's online it very easy to control from my PC ( So me likey)
Hope you guy's are well:thumbsup:
Bill:dance:
Zach will get your net going with the apex, so your in good hands. A tipi on your mp-40, when you clean it, don't remove the impeller from the shaft unless you need to. That little bearing is sensitive to the York and the shaft usually isn't dirty. :rollface:
zef004
New member
Wait till you get the vortech link with The WXM vortech expansion module for your apex. I don't have one yet but soon. I've seen them work. And it's nice you won't have the send your vortech in for updates when something new comes out or if you like set it up with reef crest in the morning and lagoon mode in the evening you can or the way you like. And more. I'm gettin the apex lite with wxm hopefuly by the end of next month.
poolkeeper1
New member
Apex/Net
Apex/Net
He already did that a while back and i love it. Thanks for the MP40 tip, I will keep that in mind.
Bill:thumbsup:
Zef, Don't you need more than one for that App to be useful??? If not LMK
Bill:dance:
Apex/Net
He already did that a while back and i love it. Thanks for the MP40 tip, I will keep that in mind.
Bill:thumbsup:
Zef, Don't you need more than one for that App to be useful??? If not LMK
Bill:dance:
poolkeeper1
New member
Thanks
Thanks
Thank you Sir, Coming from a long time original member like yourself that means a lot, And I'm sure you will have a killer tank yourself soon enough.
Once you put some of Fishdoc's coral in you can't lose Hahaha...:thumbsup:
Bill:dance:
Thanks
Thank you Sir, Coming from a long time original member like yourself that means a lot, And I'm sure you will have a killer tank yourself soon enough.
Once you put some of Fishdoc's coral in you can't lose Hahaha...:thumbsup:
Bill:dance:
poolkeeper1
New member
Marco rock
Marco rock
Not only did i not see any PO4 spike there was actually no Cycle at all and never to this day did I see any trace of Nitrate either. My roughly 75#'s at about 4 months old is completely covered In Coralline and you could not tell it apart from 10.00 lb Live Rock.
Best rock out there IMO for the money and then some!:beer:
Good luck with your project and I'm sure you will love your rock in time.
Bill
Marco rock
Not only did i not see any PO4 spike there was actually no Cycle at all and never to this day did I see any trace of Nitrate either. My roughly 75#'s at about 4 months old is completely covered In Coralline and you could not tell it apart from 10.00 lb Live Rock.
Best rock out there IMO for the money and then some!:beer:
Good luck with your project and I'm sure you will love your rock in time.
Bill
orthokardia
New member
Bill,
Were did you buy you eco-bak pettets and do you run them in the same reactor as your carbon at the same time? Also-more tank pics please.
-bart
Were did you buy you eco-bak pettets and do you run them in the same reactor as your carbon at the same time? Also-more tank pics please.
-bart
poolkeeper1
New member
Eco-Bak
Eco-Bak
Hey Bart, I got mine from Zach who got them Presale from John Warner/Warner Marine. From what i understand that is still the only way to get them at this time, Due to some pkg problems. If you call him they send them directly to your house for around 40.00 shipped per 500ml dose which is good for 100gal water volume. I do as they reccomend and run them seperatly in a BRS reactor and run some Chemipure Elite In my return section passively. You will need to remove the sponge pads from the reactor no matter which one you use and replace them with the plastic discs from the craft store (See Warner Marine now has a pellet product thread) for all the latest info out there on this product.
As soon as i get a decent camera I'll take some photos as the tank has really taken off growth wise, or if you get over this way just come see for yourself.
Bill
Eco-Bak
Hey Bart, I got mine from Zach who got them Presale from John Warner/Warner Marine. From what i understand that is still the only way to get them at this time, Due to some pkg problems. If you call him they send them directly to your house for around 40.00 shipped per 500ml dose which is good for 100gal water volume. I do as they reccomend and run them seperatly in a BRS reactor and run some Chemipure Elite In my return section passively. You will need to remove the sponge pads from the reactor no matter which one you use and replace them with the plastic discs from the craft store (See Warner Marine now has a pellet product thread) for all the latest info out there on this product.
As soon as i get a decent camera I'll take some photos as the tank has really taken off growth wise, or if you get over this way just come see for yourself.
Bill
poolkeeper1
New member
Haven't updated in a while, here are some shots from today.
poolkeeper1
New member
Thanks, Anthony hope your does well this time around If i can do anything for Ya LMK
Bill
Bill
orthokardia
New member
very nice. what is the java the hut loking thing on the sandbed right third? greenish?
poolkeeper1
New member
It's called Elephant Coral, It was mine but belongs to Rhett, I am just nursing it back to health for him at the moment. I think it originally came from Fishdoc Via a long winding road.
Bill
PS my Camera sucks when i get a new one I'll get more Photos.
Bill
PS my Camera sucks when i get a new one I'll get more Photos.
Similar threads
