Magnet/holder upgrade for 6205

[KJoFan]

I've got a 6205 with the 6080.500 magnet. What parts would I need to upgrade to the newer magnet style? Do I also need a new clamp?

Thanks!

 

[rvitko]

There are several models of magnet depending on glass thickness. The 6105.515 would be comparable in hold to the 6080.500, the 6205 would normally have included a 6205.500. You would also need the 6065.650 clamp.

 

[KJoFan]

I guess ultimately I'd replace the 6080.500 magnets with the newer style. Preferably the newest silence clamp and such. Glass thickness is 1/2". Just wondering which one is the best choice and approximate cost of the upgrade.


Sent from my iPhone using Tapatalk

 

[rvitko]

6105.515 and 6065.650 are what you need, the two should cost about $60.

 

[KJoFan]

Thanks Roger!

Second question: Would two 6205's on a 7095 controller but complete overkill for a 4x2x2 120g? Mostly soft/LPS corals now, with eventual addition of some SPS.

 

[Craig Borowski]

Would two 6205's on a 7095 controller but complete overkill for a 4x2x2 120g? Mostly soft/LPS corals now, with eventual addition of some SPS.

Yes, it would be overkill. A better fit would be two 6095s. If you plan to move to SPS-only, or maybe to a larger tank, then two 6105s with the wide-flow housing would also work very well.

 

[KJoFan]

Hmm, well part of the reasoning behind getting the 6205's (besides the good deal on them) was to buy now with an eventual upgrade to a larger tank in mind.

Can the 6205's be dialed down enough to work on the 120 or perhaps just run one of them on it?

 

[rvitko]

I would run two pumps and alternate which one is on. I agree with Craig, even the 6105's could handle a 180 without any problems. If you already have the pumps, you can use a controller to turn them down as needed.

 

[KJoFan]

I already have one of the pumps, with the intention of getting the other. (buying used) But, with the addition of the second pump I will also be using a 7095 controller to help throttle them down.