MARS Garage Sale Space Allocation

Re: Re: Re: Re: Garage Sale

Re: Re: Re: Re: Garage Sale

<a href=showthread.php?s=&postid=10612926#post10612926 target=_blank>Originally posted</a> by funman1
Sorry MARS does not yet have a License or the insurance for this...
:)

I thought that was what the membership fees went to...:p
 
XIA - sent you a pm about this:

2-55g acrylic (1 w/stand), 1-55g glass


please pm me, I might take all three from you - and it would save you from having to haul them all to the garage sale.

thx,
chris
 
Anyone interested in these items? If so pm me. Also feel free to PM me if you think my prices are psycho but you are interested. If serious, i will make sure i come to the sale since online sales are not permitted for this event.

ETSS Skimmer - was damaged in shipping. The chamber [tall clear piece] and two pieces broke off the base where the chamber connects. Clean breaks and i have super glued it all back together. Would be great for in sump application. I have not, but would recommend putting some silicone around the base of the chamber. This is an older model and will push at minimum a 250g system. I'm sure you guys probably know more about it than me. Best I could figure in comparing to the new [and lon dual tower skimmer not sold by ETSS] is that the specs are close to the ETSS 800 XR which sells for $599.

http://www.aquacave.com/detail.aspx?ID=521

- Size: 25 in Tall, base 7x10 in.
- Inlet: 1 in. pvc threaded or 1 in. OD vinyl hose
- Outlet: 1 1/2 in. pvc threaded, 1 1/2 in. pvc precision ten turn outlet gate valve included
- Flow Range: 600-900 GPH
- Recommended Pump size: 40 RT or full range 55 RT Iwaki (Pump not included)
- Recommended tanks: 180-400 gallons
- Dual full size skimming towers (Like getting two skimmers in one body)


Since was previously damaged I wouldn't know where to start on price albeit this is not a cheap skimmer. Make an offer.

30906.jpg



30905.jpg




Starphirre Aquatics AquaPod 24 Skimmer. It measures 2.25"x4"x12"; including the collection cup at its maximum height and the pump it stands at 14.5". It is simple to install and the only adjustment needed is to fine tune the height of the collection cup.

In tank 2 hours, decided I want to stop spending money on the little tank and build another. I'm wish washy like that. Pulled it out thinking I could sell easier if new instead of gunked up. I dropped the collection cup and chipped an edge so I bought another. You will get one repaired and one new collection cup. Paid $125. Sell for $100.

30909.jpg



Ikawi Pump. Came with the ETSS skimmer. She aint' pretty but I did test it and it's working. Specs below. Costs $169 new [link below]. Selling for $50.

http://www.aquabuys.com/page/aqb/PROD/iwaki_wmd-30rlt

510 GPH @ 4 ft Head Pressure
3/4" MNPT Inlet/Outlet
17.7 ft Max Head
High Quality Water Pump
Cool, Quiet and Efficient
RLT for Pressure Applications and Filter Pump Through
Domestic US Motor (WMD)



30907.jpg


30908.jpg
 
Last edited:
Can I get a preliminary 3' x 3' spot. Kinda depends on if folks are interested unless John has a Yellow Clown Goby then I'll just have to make the trip for that little $7 fish :)
 
I'll be able to make it after all. Here is a list of thing I'm planning to bring, if I remember it all... PM me about specifics on anything tonight or tomorrow until about 2pm.

- 2 SE 175watt Ushio 10,000K Metal Halide bulbs, new in box
- 5 gallon bucket of crushed coral
- a few swing arm hydrometers
- (3) rio 2500s
- PFO dual flourescent ballast with 2 24" VHOs (will run up to 2 48") and has 2 extra new VHOs
- power strips and analog timers
- 15 gallon acrylic sump (24"x12"x16")
- Mag 2
- Fluval 303 canister filter
- 50 gallon TruVu (some scratches and drilled back for intake and return with small internal overflow box) with oak stand and canopy
- Top Fathom 200A venturi skimmer
- Various Salifert test kits with less than half left (pH, Nitrate, Calcium, Organics)
- Bristleworm trap
- Small leftover chemiclean
- NIB Red Sea Phosphate test kit
- Aqualab test strips
- Seaweed selects
- 2 - 150 watt visitherm heaters
- Old school Aquanetics UV sterilizer
- Iwaki MD-30RT
- 4x36" VHO retrofit
- Sunpaq 2x96 PC retrofit with reflectors, ballast and bulbs (like new, dual daylight and dual actinic)

And maybe some more stuff...
 
<a href=showthread.php?s=&postid=10556797#post10556797 target=_blank>Originally posted</a> by Brian Prestwood
Mike

How large are you two folding tables?

Rafael

Parking your truck back there depends on how much space we have. I can't answer that question until we get a little closer to the 25th. Check back on the 23rd.


How are we looking on space?
Thanks
 
Rafael

It looks like you can park your truck in the back. Check with me when you get there.

Everyone

We're going to start setting up at 3 PM. Sales and food starts at 4 PM.
 
Back
Top