May meeting garage sale items

zeroinverse

New member
List what you may be selling so people can get some idea and maybe ask ahead of time.

I am bringing following:

1) two (2) hang on back wet/dry filter boxes that can easily be converted to HOB refugium.

2) CPR backpak protein skimmer with Rio venturi pump

3) two (2) different overflows (dual pipe and single pipe)

4) Bag full of Maxijet power heads housings (impellers all broken)

5) Misc dead coral rock

6) Ron's first attempt at silent-beananimal's quiet overflow manifold. With ball valves to limit different pipes for siphon flow or open for max flow.

7) old temp controller

8) gravity feed drip doser

9) two (2) CO2 regulators
 
Tunze 6025
Rio pumps varous sizes
Genx 1200 gal/hr pump ext.
I also have tons of hard to find PVCs,bulk heads different sizes, check valve, valves, Let me know what you want and I'll bring it otherwise I'll leave those at home.
Maxijet and mods

I need a spare heater so if you have one LMK

I also would like to trade an Utter chaos for Rasta if anyone has it.
 
Lokii, if you want the temp controller, it's a bit old and may only as a heatercontrol. Never used (& don't know if it works for cooling. That said, just give me a frag of a cool zoa or SPS for it.

a6cd8ab6-7fee-f91c.jpg


Below are other pictures of stuff I will bring just to see who wants to buy them.
a6cd8ab6-8002-f387.jpg
a6cd8ab6-800c-e75a.jpg
a6cd8ab6-8015-d9c3.jpg
 
Bringing the following, only if requested or (messaged) pm'ed.*

1) 12 gallon Aquapod aio nano. Chipped overflow tooth. Glued back. Small scratches.*
2)*12 gallon Aquapod aio nano. *Major scratches on front. Modded back chamber.*
*** choice of: mj600/stock jbj return pump/1 gutted hood (cracked light shield-bad shape) /gutted pc lights / cut acrylic top sits on top (scratches) /live sand*
3) 2 par38 led bulbs by evilc nanocustoms. *purchased fall 2010. Both ran for 8 hours a day till March 2012. (slight rust on rim due to evaporation)*
4) Aquac Remora skimmer hob w/mj1200 (rebuilt) no preskimmer
5) Free leaking 20 gallon tall eclipse tank. Got it free and never leak tested. *Brand new tube of aquarium silicone.*
6) 6month koralia nano. *Old version. *
7) 20 heat packs uni-heat 40 hour exp 10/2013. *Planning but never shipped anything.
8) Redsea max gutted pc lights*

Thanks for looking.
 
Dont feel bad Mike I've had that happen before it sucks bigtime. Its usually because Im doing the fragging in a hurry. The rastas need to be handled gently for sure and even then will be ****ed off.
 
Had to get a restart on the uc's mine bit it. Believe it or not I got the tank too clean and they just faded away. So its good to back up your corals AND zoas. Just got some from Tom and I hope they fare better or at least as well as they used too. Thx Tom.
 
Ha, I guess I could throw them in my skimmer cup :)
Do you think I should dip them, or dose Iodine?
I think this thread is getting side tracked.
 
Bringing the following, only if requested or (messaged) pm'ed.*

1) 12 gallon Aquapod aio nano. Chipped overflow tooth. Glued back. Small scratches.*
2)*12 gallon Aquapod aio nano. *Major scratches on front. Modded back chamber.*
*** choice of: mj600/stock jbj return pump/1 gutted hood (cracked light shield-bad shape) /gutted pc lights / cut acrylic top sits on top (scratches) /live sand*
3) 2 par38 led bulbs by evilc nanocustoms. *purchased fall 2010. Both ran for 8 hours a day till March 2012. (slight rust on rim due to evaporation)*
4) Aquac Remora skimmer hob w/mj1200 (rebuilt) no preskimmer
5) Free leaking 20 gallon tall eclipse tank. Got it free and never leak tested. *Brand new tube of aquarium silicone.*
6) 6month koralia nano. *Old version. *
7) 20 heat packs uni-heat 40 hour exp 10/2013. *Planning but never shipped anything.
8) Redsea max gutted pc lights*

Thanks for looking.

Adding
9) TLF (Two Little Fishies) Reactor 150. Has circular sponges and rubber L's. No hoses, valve, or pump. Used and label on side got wet so its peeling off. No effect to performance.
 
Back
Top