moon light programming

[MvM]

I'm not sure why, but my moonlight programming doesn't seem to be working.
I have a very gracious member help me with initial programming and have made some changes in ramp time and intensity.
Thoughts?
BlueLED:
Fallback OFF
Set OFF
If Moon 000/000 Then MoonLt
If Time 22:30 to 23:00 Then BlueDn
If Time 11:30 to 22:30 Then BlueUp

White LED:
Fallback OFF
Set WhiteDn
If Time 11:30 to 22:00 Then WhiteUp

SolBlue:
Fallback OFF
Set RoyalDn
If Time 11:30 to 22:30 Then RoyalUp

Profiles are:
Blue up and down
ramp time : 45
start and end intensity 65

Royal blue
ramp: 45
Start and end 70

White:
ramp: 70
start and end: 60

moonlight:
ramp:1
end: 3

 

[Deleted member 143833]

I replied already but for the benefit of people here...

I think things are fine. With a End Intensity of 3 for the moon profile you would need a moon intensity of 33 before the LED will be set to a value of 1. Tonight is 0 (so no moon) and for the next week the moon is under 33 but on the 8th the moon intensity is 35 (which should yield a dim LED).

See what happens after next week.

Question; the website; does it report that the outlet is set to "moonlight"? If yes, then it would confirm the controller is working.

 

[FuzzyLogic]

Ken, Thank you for posting your answer. I am still confused as to how the above code works. How does the moon profile know what the season table's moon intensity is? Is the OP's "moonlight" profile specific to the Neptune Moon Light Module? His code looks like he is using an AI-Sol LED fixture, correct?