More flow ?

jond

Member
I currently have two 6101s and a multicontroller in my 280 (72X30X30). I would like more flow. Should I get a 6105 or a 6205. It is destine to be an SPS dominant tank and I have a shallow sand bed.

Thanks.
 
The 6101 and 6105 have about the same flow. The 6105 has a little better range. I just purchased 2 6105s and I love them.

Turbelle Stream 6101 Specifications:

- For aquariums from 400 to 2,000 l (105 to 528 US gal.)
- Flow rate: 4,000 to 12,000 l/h (1,056 to 3,170 US gal./h)
- Energy consumption: maximum 45 W
- Voltage / frequency: 230V/50-60Hz
- Cable length: 5 m (196 in.)
- Dimensions: diam. 98 x 118 mm (3.8 x 4.6 in.)
- Outlet: diam. 50/47 mm (1.96/1.85 in.)

Turbelle® stream 6105
(6105.000)
For aquariums from 200 to 2,000 litres (52 to 528 USgal.).
Flow rate: 3,000 to 13,000 l/h (792 to 3,434 USgal./h).
Energy consumption: max. 45 W.
Voltage / frequency: 100 â€"œ 240 V / 50 â€"œ 60 Hz.
Cable length: 5 m (196.8 in.).
Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 50 mm (1.96 in.).
Magnet Holder up to a glass thickness of 19 mm (.74 in.).
 
Thanks for the input. If I add two more, what would you suggest for location? I currently have the two on opposing ends facing each other pointed slightly to the front. Oh, it is an in-wall, so no concern of cords on the sides.
 
put the pump at the front corner flow across. Controller set on interval II, each 6205 and 6101 on 1 channel pulsing between 30%-100% for 1.5s at 30 sec interval... If you find the 6205 too strong or if it disturb your sandbed, point it upward and that will fix the problem.
 
Back
Top