These
![]()
![]()
It is some algae left over from setup. I didn't clean the black to give my fish something to pick at. Coraline algae is starting to take over now.
These
![]()
![]()
Sorry I don't have any way of drawing the layout. The ATS is in the very top right side. My main display lighting is in the front hood. The turf algae is fed water by a pump down in a dump that is built onto the right side. Water is pumped into the bucket until it overcomes the counterweight then dumps into the display tank. The surge back and forth in the bucket is what makes the turf algae grow and effective. In the wild this type of turf algae has to eat or filter water quickly due to the surge of waves back and forth. This is why some scrubber systems fail. You must have a surge or bucket to be as effective.
ahh, ok
I built an ATS some time ago but was too much of an electrical hazard, having the light so close to running water continuously over the screen, seemed to work though, I'm going to contact Inland on your suggestion, thanks
little consused, where does your ats sit in relation to your lights? Are they side by side? Does the water get pumped into a bucket that tips over and runs over the screen into the tank? So every 25 sec the screen gets water running over it?
Interesting, you have the same size tank and almost all the same identical fish that are nearly all the same size.
I was curious if the dump is very loud and if it is DC controllable for changing intensity and speed of dumps, or is it strictly float and gravity operated.
I am sorry to hear about your health, best of luck.
You can't beat their full screens. They have been in that place for years. A full screen makes a new tank cycle minimal if at all.
n-lkeine, I was looking at the screen you posted a picture of. It looks kinda like rubber, all-weather, outdoor carpeting material. What does inland make their screens out of?
Sorry to hear about your health situation. Hopefully you will have better news for us at some point.
Actually the screen is two plastic screens tied together. I dont really know where they get them at. They are strong enough to withstand me scraping aggressively.
For anyone interested in buying a scubber, you really should consider it, I work at Inland and we have tanks that have been ran by scrubbers for 16 years with no water changes, just topping them off, and you can test them and they will test perfect, I have a scrubber on my tank and its awesome, scrape the screen once a week and clean it off and its ready to go, I feed 3 times a day with flake, once with rods frozen food, and once with Caulerpa for the tangs, Never a water change on my 150 since its been set up and I test 0 for everything, no phosphates no nitrates no nitrites, No hair algae, its awesome, one fish loss since I have had the tank and it was from a bad group of fish we got in if anyone is interested call morgan at inland aquatics or talk to eric or if they just want to hear more send me a message or call me at 765 592 2849
I appreciate the validity of a scrubber for nutrient export, from all I have read they appear to be excellent at keeping nitrate and phosphate low.Never a water change on my 150 since its been set up and I test 0 for everything