Hello all time for an update,
I did not like the clamp on fuge light that I had. I decided to build an DIY LED fuge light. I purchased 2
4W 4 LED 400-440LM 6000K White Light Square Panel Light $12.53 each shipped. The panels came with drivers. I did not think this was a bad price. I did take the lights apart cleaned them and replaced the crappy thermal paste with some nice
Ceramique 2. The light housing and drivers barely get warm after 8 hours of use.
Specifications
<table class="ke-zeroborder" border="0" cellpadding="0" cellspacing="0" width="100%"><tbody><tr><td width="131">
LED Quantity</td><td width="365">
4 pcs</td></tr><tr><td width="131">
Light Source</td><td width="365">
4 LED</td></tr><tr><td width="131">
Power</td><td width="365">
4W</td></tr><tr><td width="131">
Input Voltage</td><td width="365">
85-265V</td></tr><tr><td width="131">
Weight</td><td width="365">
266 g / 9.38 oz.</td></tr><tr><td width="131">
Color</td><td width="365">
Milky White</td></tr><tr><td width="131">
Luminous Flux</td><td width="365">
400-440LM</td></tr><tr><td width="131">
Dimensions</td><td width="365">
10.9 x 10.9 x 3 cm / 4.29" x 4.29" x 1.18" (L x W x H)</td></tr><tr><td width="131">
Color Temperature</td><td width="365">
6000K</td></tr><tr><td width="131">
Light Color</td><td width="365">
White</td></tr><tr><td width="131">
Lifespan</td><td width="365">
30000-50000 hours</td></tr><tr><td width="131">
Material</td><td width="365">
Aluminum</td></tr></tbody></table>
A Instrument Tech friend of mine gave me some quick disconnects and a 2 prong plug. A little solder, shrink tube and electrical tape later and this is what I got. I used Velcro squares to hold the lights to the back of the tank. I had to cut a window out of the vinyl backing on the tank.
What do you all think?
Andy