need help !!!

[KevinBroski]

I just upgraded from a AC3 to a Apex lite, and need to convert all my code to the new Apex, can someone help me please.
Here are my old code:
MIX#-A01
LT2$-A02
SKM#-A03
COL%-A04
HET%-A05
PM2#-A06
KLK&-A07
CO2&-A08
ALM&-A09


If Temp < RT+-0.4 Then HET ON
If Temp > RT+-0.1 Then HET OFF
If Temp < 68.0 Then HET OFF
If Temp > RT+0.4 Then COL ON
If Temp < RT+-0.1 Then COL OFF
If Temp > RT+5.0 Then COL OFF
If pH > 06.52 Then CO2 ON
If pH < 06.47 Then CO2 OFF
If pH2 < 08.00 Then CO2 OFF
If Time > 00:00 Then ALM OFF
If pH2 < 07.90 Then ALM ON
If pH2 > 08.45 Then ALM ON
If pH < 06.40 Then ALM ON
If Temp < 72.5 Then ALM ON
If Temp > 82.0 Then ALM ON
If Power 000 Then ALM ON
If Time > 00:00 Then SKM ON
If Power 005 Then SKM OFF
If FeedA 000 Then SKM OFF
Max Change 005 M Then CO2 OFF
If Time > 06:10 Then MIX ON
If Time > 06:20 Then MIX OFF
If Time > 12:10 Then MIX ON
If Time > 12:20 Then MIX OFF
If Time > 18:10 Then MIX ON
If Time > 18:20 Then MIX OFF
If Time > 00:10 Then MIX ON
If Time > 00:20 Then MIX OFF
If Time > 00:00 Then KLK ON
If Time > 00:10 Then KLK OFF
If Time > 01:00 Then KLK ON
If Time > 01:10 Then KLK OFF
If Time > 02:00 Then KLK ON
If Time > 02:10 Then KLK OFF
If Time > 03:00 Then KLK ON
If Time > 03:10 Then KLK OFF
If Time > 04:00 Then KLK ON
If Time > 04:10 Then KLK OFF
If Time > 05:00 Then KLK ON
If Time > 05:10 Then KLK OFF
If Time > 06:00 Then KLK ON
If Time > 06:10 Then KLK OFF
If Time > 07:00 Then KLK ON
If Time > 07:10 Then KLK OFF
If Time > 08:00 Then KLK ON
If Time > 08:10 Then KLK OFF
If Time > 09:00 Then KLK ON
If Time > 09:10 Then KLK OFF
If Time > 10:00 Then KLK ON
If Time > 10:10 Then KLK OFF
If Time > 11:00 Then KLK ON
If Time > 11:10 Then KLK OFF
If Time > 12:00 Then KLK ON
If Time > 12:10 Then KLK OFF
If Time > 13:00 Then KLK ON
If Time > 13:10 Then KLK OFF
If Time > 14:00 Then KLK ON
If Time > 14:10 Then KLK OFF
If Time > 15:00 Then KLK ON
If Time > 15:10 Then KLK OFF
If Time > 16:00 Then KLK ON
If Time > 16:10 Then KLK OFF
If pH2 > 08.45 Then KLK OFF
Thanks everyone,
Kevin

 

[aquamanic]

Look at Ken's site (kenargo.com). He's got a tool to do what you want.

 

[KevinBroski]

I tried looking it up, but am still having trouble writing these parameter, please help.
If Time > 06:10 Then MIX ON
If Time > 06:20 Then MIX OFF

 

[RussM]

Fallback OFF
Set OFF
If Time = 06:10 to 06:19 Then ON


Repeat the 'If Time...' for each additional desired stir period.

Later, as you get more comfortable with the Apex programming, you should look into using the OSC command to accomplish the stirring at regular intervals. The same applies for your kalk dosing.

 

[jeffhaag]

You could also use an OSC command

 

[swearint]

Fallback OFF
Set OFF
If Time = 06:10 to 06:19 Then ON

Minor error, the '=' is not needed.
And +1 on the OSC command. It is intended for repetitive functions and gives control down to the second rather than the minute with the Time command.

Todd

 

[RussM]

Argh! Thanks Todd!