No sand or sand bed

paulojbsilva

New member
Hi all.
I have a 150 liters tank setup and I have been trying to get it stable for the last year, with no success. I believe it's due to the poor quality of the rock I started with. I had about 20 kgs and about 6 kgs of fine sand. I cannot get rid of green algae although nitrates and phosphates are low (probably due to the algae). Yesterday I went crazy and took 90% of the rock to a plastic container on my tool shed and let it there with salt water and a power head. Hope to let the rock cure for a couple of months. The tank now just has sand and two small rocks. The inhabitants are 2 clowns and a blue damsel, 1 lysmata, 2 ceryth and a strombus. On the sump I have 3 hermit munching some leftovers of chaeto.
Can someone throw some ideas? I can't seem to get somewhere with this tank.


Enviado do meu iPhone usando o Tapatalk
 
Paulo, what's the history of the rock you used? What do your parameters look like? What does your feeding routine look like?
 
Well, part of rock I got came from a guy who was selling his setup, and other part from local fish store. Thought I was doing a good choice. I put it in the tank and until now I only have a xenya that was stuck on live rock. As for the parameters, phosphates reads 0 on Salifert test, and nitrates around 2...I believe that now I've removed lots of the rock and the green algae that was on it, those values will rise. I'll make some tests tomorrow and probably a wc after.
About the feeding, I give about a quarter of a cube of frozen shrimp/mysis mix, rinsed with water.
I forgot to mention I'm running a Chinese LED (that I believe is ok) for 6 hours and I have a tunze skimmer running 24/7.



Enviado do meu iPhone usando o Tapatalk
 
I've ordered a mesh bag and hope starting GFO this week, but I've been trying to go the more natural way possible. Do you guys think I can run GFO only on a mesh bag or I really need a reactor? Maybe I should add some active carbon too?


Enviado do meu iPhone usando o Tapatalk
 
Ok, routines updated. Cleaning filter sock every 2 days and getting a uv filter today. Changing 10% water volume twice a week. Let's see


Enviado do meu iPhone usando o Tapatalk
 
Got my uv filter! Hope it's not overkill, since my tank has around 150 liters with a 30 liter sump and I got the TMC Vecton 600...I'm putting it in tomorrow. Let's see. Should I expect a decrease in the algae situation? Should I keep it on 24/7 at this time, since I have this algae outbreak?


Enviado do meu iPhone usando o Tapatalk
 
i hate to say it but removing your rock all at once is going to cause more harm than good. i appreciate what your trying to do by running a natural system, i also opted out of the tech side of reefing : ) but by doing that your rellying on the rock to be your filter which youve now removed! personally i would of left the rock in.. increased your w/c routine and added the carbon and some rowaphos to your sump. at this stage your now holding out that your sand bed is going to do all your filteting which im afraid it wont! personally ide scrub what growth you have on your rocks and return them to your DT. your bioload from what youve said you feed is on the low side so your rock should cope well with it. have you tried something like an algae scrubber or cheato in your sump to help with nutrients? some pictures of your setup would help people advice you further, but in my mind youve gone the wrong way so far sorry to say. Good luck : )

Sent from my SM-G920F using Tapatalk
 
Thanks garethwood. I'm starting to think I have to go as you said. I didn't dried the rock. It's still alive, and probably better than it was, since I gently scrubbed the algae, hopping to maintain the life in it. It's in the same water parameters that in the dt tank (roughly). I just wasn't thinking on adding it now to the dt, was thinking on curing it. But maybe you're right. I'll get the phosban or something like that and the carbon. And as soon as I get those, I'll put the rock back. I'm afraid that if I put it back now, the algae will win the battle again.
So, rowaphos or phosban? What the favorite out there?
And another thing. I have really small grain sand bed and rely on one strombus and two ceryth to take care of it. That takes me to two questions. Should I vacuum the sand bed or leave it as it is so the anaerobic bacteria don't be dislocated? Should I change it to another type of grain that don't get so compacted?


Enviado do meu iPhone usando o Tapatalk
 
rowaphos is the best by far but is more costly, you can just put it in flow in your sump in a bag and change it monthly.
as for the sand most people recommend stiring and syphoning a small area each w/c and do it in sections as to not disturb the bacteria balance

Sent from my SM-G920F using Tapatalk
 
Save yourself some money and just buy bulk GFO from BRS. At the amount your going to change, you'll appreciate the lower cost. Then once you have things cleaned up, maybe run the rowaphos.

I've run them all trying to clean up my algae mess. They all absorb(last) in my tank about the same amount of time, but I found the bulk from BRS to be the cheapest.
 
rowaphos is the best by far but is more costly, you can just put it in flow in your sump in a bag and change it monthly.
as for the sand most people recommend stiring and syphoning a small area each w/c and do it in sections as to not disturb the bacteria balance

Sent from my SM-G920F using Tapatalk



Can I run carbon the same way too? Run them both?
Tomorrow is WC day. Will do some siphoning.


Enviado do meu iPhone usando o Tapatalk
 
Save yourself some money and just buy bulk GFO from BRS. At the amount your going to change, you'll appreciate the lower cost. Then once you have things cleaned up, maybe run the rowaphos.

I've run them all trying to clean up my algae mess. They all absorb(last) in my tank about the same amount of time, but I found the bulk from BRS to be the cheapest.



Well I bet it would be a good bet, but I don't have access to BRS material here in Portugal. Only thing from BRS is the YouTube videos eheheh [emoji12]


Enviado do meu iPhone usando o Tapatalk
 
I've ordered a mesh bag and hope starting GFO this week, but I've been trying to go the more natural way possible. Do you guys think I can run GFO only on a mesh bag or I really need a reactor? Maybe I should add some active carbon too?


Enviado do meu iPhone usando o Tapatalk
I 2nd Garethwood. I got rid of green hair algae from rocks by keeping lights off for a week, could've been also all the CUC n Tang that also cleaned rocks during lights out. If its GHA, please read Meleev's article & watch his video for some good info on how to get rid of it. http://www.melevsreef.com/gha.html
 
Well, I intended that when I put the rocks on the plastic container in the dark. They are almost clean...maybe next week they're back in the dt.
Will dive into the article you suggested. Thank you very much.

Just finished a 15% WC. Uv is hopefully burning the floating algae spores. I tried to scrape as much as I could. It was a real mess. Tomorrow I'll clean the filter sock as it probably will be full of algae. I've ordered carbon and GFO.
If all this will be insufficient...I'll be totally lost here.


Enviado do meu iPhone usando o Tapatalk
 
Well, it seem I'm not that off Melev's method. I'm just 2 weeks away from the 1 month in a dark container and the amount of snail [emoji222] eheh
Maybe tomorrow I'll get a few


Enviado do meu iPhone usando o Tapatalk
 
Ok...I'm a bit lost.
Today I did some tests. My phosphates are barely untraceable, but my nitrates are around 35ppm.
Could this be the algae dying in the uv filter that are rotting and producing the nitrates? I'll do another wc tomorrow.
At least seem the algae are not getting widespread. And I got two hermit crabs I had banned to the sump because they killed some turbos, back in the dt munching like crazy.
But what really messed my mind was the nitrates high and phosphate low. I thought they were supposed to be more like the same.


Enviado do meu iPhone usando o Tapatalk
 
Back
Top