overflow install help for 300g

[rogergolf66]

so these ghost overflows aren't available?

I was looking at this it's similar http://store.txholeyrocks.com/index.php/500gph-overflow-box-kit-831.html

Looks good. I can't c inside the box to c if it looks like the goats on the inside but I like that it's made in the USA that normally will mean good customer service if u need it.

1.5 in bulkheads r huge that's good

 

[CuzzA]

Definitely would work. Now when you plumb the beananimal it appears those 3 holes are pretty close together so I would suggest putting the emergency drain in the center and then the full siphon on one side and the open channel on the other. This way you can fit the downward facing elbow parallel with the box. Also, another tip is to be sure and brace the drains to your stand so you don't accidentally crack a bulkhead or even worse crack the box.

It appears to be similar to a ghost overflow. The only difference is Reef Savvy cuts the whole channel rather than use just holes. Nevertheless, this would accomplish the same thing. After all it is an aftermarket product.

 

[Kaiser24]

how high should the left and right pipes be? will the 3000gph be enough for a 300 gallon?

 

[Kaiser24]

I tried to buy the one in my link but couldn't for some reason through their ebay account or their website. I might have to find a different one

 

[rogergolf66]

how high should the left and right pipes be? will the 3000gph be enough for a 300 gallon?

I would have recommended 2 of them

 

[janes_mw]

Glass Holes has some overflows as well I believe. I have zero experience with them, but I am sure others here can chime in.