Ozone generator DIY

<a href=showthread.php?s=&postid=10928903#post10928903 target=_blank>Originally posted</a> by H20ENG
Basically corona is produced by a high voltage electrode, ground electrode, and a strong dielectic (glass is best, acrylic works OK) between them.
Wouldn't acrylic overheat and melt or catch fire ?
 
They dont get that hot. Remember you dont want a spark. but if you turn the lights out, you can see the blue corona. Note: dont go walking around a HV device in the dark :lol:
 
<a href=showthread.php?s=&postid=10935086#post10935086 target=_blank>Originally posted</a> by H20ENG
They dont get that hot. Remember you dont want a spark. but if you turn the lights out, you can see the blue corona. Note: dont go walking around a HV device in the dark :lol:
What if I am holding a beer with my left hand ? can I still get buzzzzedddd?
 
H20ENG and others your information is very valuable and is taking effect right now. I am almost done with my ozonizer !!! I call it "Frankenstein", I will post picks soon :D Thanks again
 
Can you sniff ozone ? what is supposed to smell like ?

Like bleach with a forest fire going. Ever smell a photocopier? Smells like that too.

also some quotes from the net:

"fresh air after an electrical storm"

"Ozone has a sweet, pungent odor"

"a little like some felt pens can smell
but different"
 
What he said. I call it sharp, it can be both acrid and sweet at the same time. You will know it immediately after you fire it up.
 
I've got an old "Lightning Ball" novelty, the glass ball with a plasma inside that will follow your finger if you touch the outside. It produces an ozone smell when you touch the glass. And it uses a small wall wart transformer that probably isn’t high wattage. I wonder if I put that in a glass jar, and pump some air into the jar, and then out to the skimmer… Hmmm…
 
<a href=showthread.php?s=&postid=10943282#post10943282 target=_blank>Originally posted</a> by jnarowe
no posts...he's dead guys. :(
its aliveee its aliveeeeeee Frakenstein just arcked.................. bbzzzzzzz bzzzzzzz BOOOOOOOM I WILL REPLASE THE FUSE AND POST AGAIN .......:smokin:
 
15 kv arc's all over tha place even 1" gap, see the 30 ma is allot :D, When using the 7.5 kv center tap all is fine and I see the corona discharge :D It WORKSSSSS. I will post picks when is completely finished, safety first !!!
 
If you take 2 pieces of metal window screen, cut them to about 4x4" then cut a piece of 1/8" acrylic to 6x6" hot glue them to each side of the screen, then connect your Xfrmr leads to each screen. PFFFFT Ozone in 2 minutes:D
 
The unit has a maximum output of 30 ma at 15kv, I measured the input and output current, and I figured it draws about 50 - 60 watts total at 7.5 kv, some is waisted in the GFI (is Gfi protected) so I am pumping maybe 45 watts, ozone is definitely there I smell it :D, my question is in a 130 gallon system how long do I run ozone in the skimmers venturi ?
 
Back
Top