Ozone setup ? Did i do this currectly??

[janey]

I bought a used Red Sea AquaZone Plus 50 mg/hr ozonizer.

This is how i hooked it up /
I hope i did it currently ....

1. Take the Air pump and connect to air dryer

2. then to Input of Ozonizer

3. from the output of ozonizer i connected hose to pump 606
which has a tee.


From The 606 pump a hose going into a reactor with zeolite rocks and
Zeo carbon .


Also Question
How long should i have the hose from air pump to dryer ?
and Hose from output from ozonier to pump?

I also keep having the air dryer pooping off from pressure of the air pump ..

 

[janey]

opps misspelled Meant to write " correctly"

 

[CleveYank]

You have the air to dryer to ozone correct.
Whether you are supposed to run that through zeo reactor I have no clue.

But the pre and post ozone steps are good.

The shorter the run on the airlines the better you'll be.

Sometimes small zip ties over the hose end keeping it on the barb of the outputs can keep them from coming off.
I did have to resort to using an auto spring hose clamp one time when the output I was coming off of was smooth metal tube and didn't have a barbed end for the zip tie and flex to bite into.

 

[janey]

thanks
Cleveyank...