celamb89
New member
Hello everyone,
So I've had this LTA for about 4 months now.. I just to have it in my 42gal and it was attached and happy... 1month ago I upgraded to a 130gal DT my params are in check..
PO4=0
NO3=0
Ca=420
PH=8.2
I have 6x54w fixture and the LTA eats when fed (about once a week)...
So the problem is that the LTA is having problems finding its happy place it attaches and then detaches. It stayed attached to a corner for about 6 days and the detached and has been attaching and detaching from this corner constantly... This corner has low flow and since I have a 2" sand bead I have places with 4" where I see the LTA will attach...
It is a healthy LTA with color, sticky and eats... So What do I do? Should I do some cave with a PVC pipe?
Please help because it has already been 1 month of this. I thought sooner or later it would attach but its getting to much on the later side hehe...
Any advice, tips, directions would help!
Thanks for the posts!
So I've had this LTA for about 4 months now.. I just to have it in my 42gal and it was attached and happy... 1month ago I upgraded to a 130gal DT my params are in check..
PO4=0
NO3=0
Ca=420
PH=8.2
I have 6x54w fixture and the LTA eats when fed (about once a week)...
So the problem is that the LTA is having problems finding its happy place it attaches and then detaches. It stayed attached to a corner for about 6 days and the detached and has been attaching and detaching from this corner constantly... This corner has low flow and since I have a 2" sand bead I have places with 4" where I see the LTA will attach...
It is a healthy LTA with color, sticky and eats... So What do I do? Should I do some cave with a PVC pipe?
Please help because it has already been 1 month of this. I thought sooner or later it would attach but its getting to much on the later side hehe...
Any advice, tips, directions would help!
Thanks for the posts!