Plumbing help

[Kyle954]

Hey Guys got a question for a more experienced reefer then me!

I am trying to start the plumbing on my 180 dual back overflow aquarium.

The problem I'm having is the aqueon megaflow bulkheads are 1.5" for the drain and 3/4" for the return and both are BARBED ends.

To use PVC I would have almost no flow for return piping to have it fit inside the return bulkhead due to it only being 3/4".

Should I used flex spa piping from the return pump to a "T" splitter to each return bulkhead and clamp it at the bulkhead and be done with it?

Hopefully somebody understands my mess of an explanation lol

Thanks!

 

[rovster]

Change the bulkheads. Problem solved, LOL!

 

[Deep Reef]

Change bulkheads, I use the 3/4 for drain on each side with valves to adjust. The 1" are emergency overflows and also drain to sump. I use (2) 3/4 supplies over the top of the tank for return. ( I'm running a 120).. Herbie. Method very quiet.