power controll?

[rogergolf66]

Well I have the 6100's with the 7094 contoller it is just to much flow at 100% so Was thinking about turning the power level down with the screw on that little box that comes with the units but it said that if they are to be on a controler then to have it set to max power. can I turn them down on that box with out any problems?

or do you have any other ideas?

Thanks

 

[rvitko]

If you use a controller and adjust the driver you will have problems, the alarms will sound and the pumps will stop periodically. The best solution is to get the smaller 7210.202 transformer and scale back your 6100 to a 6000.

 

[rogergolf66]

Well I changed the settings on the controller so pump 1 turn on then slot 2 no pump then slot 3 no pump then slot 4 with pump then repeat so that seems to be working ok that way I don't have a constant pounding.

I really wanted to me able to turn one off and the other one on and alternate and create a nice wave/ swaying action of the water.

any Ideas to do that?

 

[rvitko]

Use Interval or Tide mode and plug one pump into the first outlet and one into the last.