Power Failed ?

[elahav]

Every 2 -3 days I have "œPower Failed" on the Apex for 1-2 second , and I don't even notice that (sometimes I do when I get the alarm on) I can see that its happened in the status page of the Apex. Anyone face that?

 

[aquamanic]

It sounds like the base module is rebooting. Will give you the same alarm.

- make sure your firmware is current.
- make sure you're not using port 80 as your public facing port in your router.
- make sure you have a firewall running.

 

[elahav]

Thanks Alan
Firewall was disabled on the Apex. I enable it and allow “web server” and “telnet server”. So far it looks o.k. Do I need to open anything else? I will wait to see if I will have a power down
Thanks

 

[aquamanic]

There's been some problems reported with the Apex rebooting due to some internet bots pinging the controller and the Apex web server not knowing what to do. Changing your public port from the default of 80 would make that much harder. Yours might already be changed. And make sure your firmware is current. Neptune is fixing these things all the time.

 

[elahav]

Thanks Alan. Now i just need to wait and see...Its nor that big thing but i hope it will solve it.