reef_enthusiast
Member
Hi Everyone,
Is anyone familiar with the issue i'm having? My Pro-Cal does not build up any pressure. I emptied it out. cleaned it out. Then i just filled it with water and a bucket on the side with water for input and output to test it out. the pressure guage does not build up any pressure. Also, the water in the main chamber just starts emptying out. The inlet tube is all the way on the bottom of the bucket while the outet tube is just above the water surface.
one thing i noticed also was if i took off the clear tube that delivers the CO2 into the main chamber, you can hear air coming out of it from the main chamber. However, no air is coming out of the red tube that's supposed to relieve any excess air in the main chamber.
I was thinking of replacing it with but before doing so, i wanted to see if it could be fixed since i did spend $800 on it and it's only 2 yrs old.
Thanks for the help...
Is anyone familiar with the issue i'm having? My Pro-Cal does not build up any pressure. I emptied it out. cleaned it out. Then i just filled it with water and a bucket on the side with water for input and output to test it out. the pressure guage does not build up any pressure. Also, the water in the main chamber just starts emptying out. The inlet tube is all the way on the bottom of the bucket while the outet tube is just above the water surface.
one thing i noticed also was if i took off the clear tube that delivers the CO2 into the main chamber, you can hear air coming out of it from the main chamber. However, no air is coming out of the red tube that's supposed to relieve any excess air in the main chamber.
I was thinking of replacing it with but before doing so, i wanted to see if it could be fixed since i did spend $800 on it and it's only 2 yrs old.
Thanks for the help...
