I have 3 genII Radion Pros. 2 on the display, and 1 over the frag tank in the other room. When the lights get to the lower percentages the 2 over the display are clearly different. One more green and the other blue. The settings are exact copies controlled through Fusion. I calibrated the lights through usb as instructed, but the lights will not pair back up to the wxm without usb resets. Now I am back to where I started, 2 different colored lights above one tank. Is there any way to remedy this?
Radion Calibration and WXM
- Thread starter 96slowbra
- Start date
Alex Y EcoTech
RC Sponsor
96,
If you performed a calibration through ESL that is a very unusual issue. I would recommend trying the calibration again. For best results, perform the calibration in a dark room.
If you performed a calibration through ESL that is a very unusual issue. I would recommend trying the calibration again. For best results, perform the calibration in a dark room.
Similar threads
