Recommendations for 7095/6100

[The_Taz_Devil]

I have a friend with a 7095 with single 6100 stream, they wanted to know what the best setting would be in their tank ?

 

[rvitko]

With one 6100 your only option is pulse mode.

 

[The_Taz_Devil]

I thought that would be the case, I would suspect 3 sec intervals would be ok. Thanks for the reply Roger.

 

[The_Taz_Devil]

Sorry Roger, last question.

If you only have one stream connected to the controller then you only have the option to use pulse. Would you recommend you do this in 3 second pulses, basically I believe the unit will pulse for this period using a speed between the 2 speeds you have set on the bottom 2 dials (min and max). This will change every 3 seconds to a different value between the 2, but just ensure that the lowest speed is over 30% - is that correct......im sure all this is in the information documents but I have lost them......

 

[rvitko]

Yes, that is exactly how I would do it.

 

[The_Taz_Devil]

Thanks Roger