Reeflo/Sequence Skimmer Club

<a href=showthread.php?s=&postid=12811833#post12811833 target=_blank>Originally posted</a> by reeflopumps
please base you conclusions about our company and its service from your own experience and from people that you KNOW..do not take the word of someone who is a professional shakedown artist. If you or anyone that you know has had a problem that we have not resolved, please let me know. We have sent out parts the harrassment is endless.
Click to expand...

So now you're calling me a PROFESSIONAL SHAKEDOWN ARTIST ... Are you F'n kidding me..? :eek2:

I was first notified via email at 11:17am central time this morning that parts were being shipped out, and I immediately posted as such here... :rolleyes:

-Tim
 
<a href=showthread.php?s=&postid=12811833#post12811833 target=_blank>Originally posted</a> by reeflopumps
please base you conclusions about our company and its service from your own experience and from people that you KNOW..do not take the word of someone who is a professional shakedown artist. If you or anyone that you know has had a problem that we have not resolved, please let me know. We have sent out parts the harrassment is endless.
Click to expand...
I would also like you to point out what part of my post is untrue, since you feel compelled to want to call me names! :hmm3:

-Tim
 
<a href=showthread.php?s=&postid=12811833#post12811833 target=_blank>Originally posted</a> by reeflopumps
please base you conclusions about our company and its service from your own experience and from people that you KNOW..do not take the word of someone who is a professional shakedown artist. If you or anyone that you know has had a problem that we have not resolved, please let me know. We have sent out parts the harrassment is endless.
Click to expand...

I do know tgreene personally and his setups are pristine and he does have a legitimate issue with your products and so does one of his clients that i also know personally. I have seen both locations and setups in fact I was the one who looked up the number for reeflo while tim was at his clients office trying to sort out the pump issue a while back. I know for a fact that issue with her pump was not resolved. So yes I am listening to people I know about your products and services.
 
Here is the Reeflo 200 upgrade cup just shy of a week running. And cleaned the cup twice.

DSCN2981.jpg


DSCN2982.jpg


And for those that are looking forward to the upgraded wheel. Here is the prototype on the 200

DSCN2963.jpg

as you can see I need a Dwyer that reads higher than the one I am using to see what it is actually pulling. It is pinned at 50 and sounds like a hoover.
 
<a href=showthread.php?s=&postid=12812504#post12812504 target=_blank>Originally posted</a> by tgreene
Yes I do, and I also recall several others that had similar issues that posted about them! :rolleyes:
Click to expand...

I think he did the right thing here. If someone sells something on this board and doesn't go though with the sell what does everyone do...they post about it.... samething here.. it's funny how things workout after a bad post comes up on the forums
 
JRaquatics = will they have a upgraded wheel for the 250. if so an idea as to when they will be available and how much.
 
They will have a wheel for the 250. Infact Mike at Reef Specialty got one on his 250 and the results are amazing. I was told that they should be getting the final wheels at the end of July. I don't know how much they will be though.
 
Here are a few pics of the Reef Specialty prototype NW attached to the Dart Gold. I currently am testing on a Reeflo 200 .



So far I am really impressed. These will definately take the 200 and 250 to a whole new level.

b566d116.jpg
[/IMG]
04054d71.jpg
[/IMG]

:D
 
Hi guys,

I am considering a lot in change my Euro-Reef RC 500 that I have in my 180 gal. Reef Aquarium heavly stocked with fishes (tangs, angels, triggers, etc.) with an Orca 250 Skimmer w/Orca Gold pump.

So what do you think and recommend me my friends ???

Do you do this change also ??

Which one of this both skimmers do you think is better ?

Any comment or recommendation will be very helpful for me.

Thank you in advance!!

Mario
 
I switched from the Euro dual RC pumps for the Orca 250 for my 200gal/295sys. In addition to the gold pump make sure u get the cup upgrade.
 
Hi benf, so you recommend me to do this switch-change the RC 500 for the Orca 250 ??

Yes I saw the upgrade the only problem is that the Orca 250 skimmer wouldn´t fit inside the stand with the bigger cup, because I have a 35" space there.

Thanx

Mario
 
<a href=showthread.php?s=&postid=12860035#post12860035 target=_blank>Originally posted</a> by mariocaz
Hi benf, so you recommend me to do this switch-change the RC 500 for the Orca 250 ??

Yes I saw the upgrade the only problem is that the Orca 250 skimmer wouldn´t fit inside the stand with the bigger cup, because I have a 35" space there.

Thanx

Mario
Click to expand...

Do u have any other place to put the skimmer? Actually, mine is outside the house!! Cause its a big plus having the longer neck on the cup!
 
Unfortunately I don´t have any space in other place to put the skimmer, yes I saw the performance with the largest cup and yes is a very important plus.

But I have the Aquarium in a room of the house. :(
 
start at the beginning of this thread (or maybe the orca 200 thread?) and you'll see the cabinet jeremy built to house his skimmer next to the tank. this may work in your situation.
 
Here's a pic Drstupid mentioned of the skimmer cabinet before the door was put on.

entirestand.jpg


I love having the skimmer out from under the stand. The nice thing is that it allows me to upgrade equipment with minimal modding of the system. Like I had to to allow for more head height for the Upgrade cup.:smokin:

DSCN2981.jpg


It's is nice to have room to mess with my reef toys.:D
 
Install help! Arg

Install help! Arg

I just purchase my Reeflo 250 today. Did they give me the wrong pump or attachment??
When I install the airvalve onto the skimmer it points straight at the ground! The hose is completely kinked. Also my pump has this weird drain in it that won't tighten.
Any ideas, am I setting this thing up right??
the instructions are garbage..

<a href="http://picasaweb.google.com/strendo718/Tank/photo#5221189957061474226"><img src="http://lh4.ggpht.com/strendo718/SHVkmld8d7I/AAAAAAAAAcg/J3_I9QcTz8w/s400/IMG_0377.JPG" /></a>


<a href="http://picasaweb.google.com/strendo718/Tank/photo#5221189895726155698"><img src="http://lh3.ggpht.com/strendo718/SHVkjA-dx7I/AAAAAAAAAcY/QLwg2RGHu50/s400/IMG_0376.JPG" /></a>
 
You must log in or register to reply here.

Similar threads

jay505
Is STARS still an active club
Replies
3
Views
58
griss
griss
sauceyreefOG
New (but old) Member - Hello!
Replies
12
Views
523
Reefing102
Reefing102
Guygettnby
Stuck between 2 skimmers...
Replies
12
Views
415
Guygettnby
Guygettnby
S
Why do oversized protein skimmers not adequately remove protein from a tank?
Replies
12
Views
200
Paul B
Paul B
M
ATO Problem in JBJ NanoCube 24g
Replies
0
Views
221
MNtadpole
M
Back
Top